ERay Spoiler options
08-23-2023, 05:47 PM
#1
Instructor
Thread Starter
ERay Spoiler options
Has anyone done research on removing the ducktail spoiler on ERay, how many holes would need to be covered up in order to install a Z06 high wing? It sucks that spoiler delete is not an option, I personally hate the ducktail spoiler and wondering what aftermarket options would be, maybe someone going to Carlisle can post some close up pics.
The following 3 users liked this post by C823:
08-24-2023, 05:33 AM
#2
Racer
It is my understanding that because of the extra downforce of the Z06 spoiler, there are reinforcements needed inside the rear bumper. It is much more than matching/covering holes.
08-25-2023, 10:26 AM
#4
Instructor
Thread Starter
Assuming it's going to be a similar setup to install it, which should be doable. My question was more about what it looks like when the ducktail spoiler is removed.
The following users liked this post:
Lefty32 (08-26-2023)
08-25-2023, 11:10 AM
#5
I know I will probably be criticized for this but I think something similar to the optional high wing from the Stingray would great on the Z06 and Eray.
The following users liked this post:
StormTrooper R (08-31-2023)
08-25-2023, 12:07 PM
#6
Race Director
Member Since: Nov 2017
Location: Prosper TX/Austin TX
Posts: 10,963
Received 8,880 Likes
on
4,279 Posts
2020 C6 of the Year Winner - Modified
If it's the same as the Z06 standard spoiler, there are 10 holes. Pretty sure my C6 Z06 spoiler has the same number iirc. Seems to be GM's magic number for installing rear spoilers.
Rear spoiler install starts around 20:00 in this vid.
Rear spoiler install starts around 20:00 in this vid.
The following users liked this post:
haroldbwill (10-22-2023)
08-25-2023, 12:08 PM
#7
Race Director
Member Since: Nov 2017
Location: Prosper TX/Austin TX
Posts: 10,963
Received 8,880 Likes
on
4,279 Posts
2020 C6 of the Year Winner - Modified
08-25-2023, 04:57 PM
#8
The following 3 users liked this post by larryfdx:
The following 3 users liked this post by IrishSpuds:
08-25-2023, 10:22 PM
#10
08-31-2023, 09:54 PM
#11
The 2023 I bought off a dealer lot has one and I have grown to like it. The white high fin looks fine from the side or the back on an Arctic White car. I have had several thumbs up and nods from Ferrari and Lamborghini drivers, so they did not seem to mind it.
The following users liked this post:
haroldbwill (10-22-2023)
08-31-2023, 11:22 PM
#12
Racer
09-05-2023, 06:11 PM
#13
Racer
To the OP's point, I've just noticed that AGMotorsports now shows their aero bits (splitter/side skirts/spoilers) to be interchangeable for Z06 and ERay.
I hoped that would be the case but this is the first evidence I've seen. Have THEY tested their parts on an ERay? IDK but I take encouragement from that and will now leave some aero bits off of my ERay build in anticipation of aftermarket purchases.
I hoped that would be the case but this is the first evidence I've seen. Have THEY tested their parts on an ERay? IDK but I take encouragement from that and will now leave some aero bits off of my ERay build in anticipation of aftermarket purchases.
The following users liked this post:
haroldbwill (10-22-2023)
09-05-2023, 08:17 PM
#14
Burning Brakes
Member Since: Apr 2022
Location: Melbourne Florida’s Barrier Islands
Posts: 1,190
Received 1,072 Likes
on
490 Posts
Has anyone done research on removing the ducktail spoiler on ERay, how many holes would need to be covered up in order to install a Z06 high wing? It sucks that spoiler delete is not an option, I personally hate the ducktail spoiler and wondering what aftermarket options would be, maybe someone going to Carlisle can post some close up pics.
The following 2 users liked this post by Fishfryer527:
haroldbwill (10-22-2023),
kevinprimetime (09-08-2023)