C7 Z06 Discussion General Z06 Corvette Discussion, LT4 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: GEM Motorsports

Corvette Forum Scoop: Horsepower Figures for Callaway Z06 Announced

Thread Tools
 
Search this Thread
 
Old 07-28-2015, 12:40 AM
  #1  
ManuelCarrillo3
CorvetteForum Editor
Thread Starter
 
ManuelCarrillo3's Avatar
 
Member Since: Sep 2013
Location: El Segundo California
Posts: 332
Received 3 Likes on 3 Posts
Default Corvette Forum Scoop: Horsepower Figures for Callaway Z06 Announced



I've been working hard to bring you this scoop, and now the info is here. You heard it here first, folks. These are the official numbers for the Callaway Corvette Z06.

Quoted from the full story on the Corvette Forum homepage:

"We've had to wait until today to find out how much horsepower and torque Callaway's track day king will be producing. Now that the automotive engineering firm has achieved final calibration and validation, we can report Callaway has massaged the Z06's 6.2-liter LT4 V8 to 757 horsepower and 777 pound-feet of torque."

Read the rest on the Corvette Forum homepage. >>


Old 07-28-2015, 12:54 AM
  #2  
OnPoint
The Consigliere
Support Corvetteforum!
 
OnPoint's Avatar
 
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,259
Received 5,457 Likes on 2,274 Posts

Default

Oh my.
Old 07-28-2015, 02:08 AM
  #3  
FastMatt2
Burning Brakes
 
FastMatt2's Avatar
 
Member Since: Dec 2001
Location: alamogordo nm
Posts: 774
Received 4 Likes on 4 Posts

Default

757 hp, warranty, and heat soak problems solved, 16K.... there going to sell allot of these cars. GOOD JOB!
Old 07-28-2015, 03:07 AM
  #4  
15Z06
Instructor
 
15Z06's Avatar
 
Member Since: May 2015
Posts: 141
Likes: 0
Received 5 Likes on 4 Posts
Default

Sorry bro, your "read it here first" scoop was scooped two hours earlier in another thread.
Old 07-28-2015, 03:24 AM
  #5  
vegasredz062
Melting Slicks
 
vegasredz062's Avatar
 
Member Since: Feb 2006
Location: LAS VEGAS NV
Posts: 3,014
Likes: 0
Received 118 Likes on 60 Posts
St. Jude Donor '08

Default

Originally Posted by FastMatt2
757 hp, warranty, and heat soak problems solved, 16K.... there going to sell allot of these cars. GOOD JOB!
great deal for warranty and that kind of HP.
Old 07-28-2015, 07:28 AM
  #6  
rob62
Safety Car
 
rob62's Avatar
 
Member Since: Nov 2007
Posts: 4,570
Received 1,737 Likes on 876 Posts

Default

first complaint..... Gotta "pretty up" that exposed s.c. a little.
Old 07-28-2015, 07:59 AM
  #7  
Rkreigh
Le Mans Master
 
Rkreigh's Avatar
 
Member Since: Dec 1999
Location: Alexandria, Virginia, USA VA
Posts: 9,777
Received 707 Likes on 543 Posts

Default

Originally Posted by rob62
first complaint..... Gotta "pretty up" that exposed s.c. a little.
take a c3 style stinger hood scoop and blend it in

I think it would look great! make it a "low rise" with just enough clearance to cover the engine rock.

viola!

nice work, I think this blower will gain a following. more room to grow if you think 750 isn't enough

glad to see the MPH in the test too
Old 07-28-2015, 08:07 AM
  #8  
jvp
Tech Contributor
Support Corvetteforum!
 
jvp's Avatar
 
Member Since: Mar 1999
Location: Northern VA
Posts: 10,087
Received 3,836 Likes on 1,156 Posts
"Ask Tadge" Producer

Default

Originally Posted by FastMatt2
heat soak problems solved
Which heat soak problems?
Old 07-28-2015, 08:35 AM
  #9  
0Callaway Chris
Former Vendor
 
Callaway Chris's Avatar
 
Member Since: May 2001
Location: Callaway Cars - Old Lyme, Connecticut
Posts: 6,125
Received 738 Likes on 419 Posts

Default

Originally Posted by ManuelCarrillo3


I've been working hard to bring you this scoop, and now the info is here. You heard it here first, folks. These are the official numbers for the Callaway Corvette Z06.

Thank you for the post and mention on the Front Page of Corvette Forum.


For info on ordering your Callaway SC757 Z06 Corvette, please drop us a note: info@callawaycars.com

Thank you again
Old 07-28-2015, 09:27 AM
  #10  
09Z06pj
Le Mans Master

 
09Z06pj's Avatar
 
Member Since: Jan 2011
Location: Fresno CA
Posts: 8,663
Received 1,100 Likes on 752 Posts

Default

Originally Posted by OnPoint
Oh my.
Old 07-28-2015, 09:37 AM
  #11  
FireChicken_n_Vettes
Heel & Toe
 
FireChicken_n_Vettes's Avatar
 
Member Since: Jun 2015
Location: Mistake on the Lake Pennsylvania
Posts: 21
Received 3 Likes on 2 Posts
Default

Ahhhhhhhhhh, Holy Crap! That's amazing...I cant wait to see these run now. Like someone said, all the heat issues are solved and more power for that price is nothing! I cant wait to see the Videos!
Old 07-28-2015, 10:17 AM
  #12  
GCRoberts
Racer
 
GCRoberts's Avatar
 
Member Since: Sep 2011
Location: Niagara Falls NY
Posts: 491
Received 13 Likes on 11 Posts

Default

I just want to make sure I understand this correctly. If you spend an additional $23,055, you can get the ZCR option (C7.R Edition Coupe) which gives you no performance enhancements at all and overheats on the track. Or you can spend an additional $16,995 and get a Z06 that's significantly more powerful and supposedly doesn't overheat?
Old 07-28-2015, 10:43 AM
  #13  
thebishman
Melting Slicks
 
thebishman's Avatar
 
Member Since: Aug 2000
Location: Overland Park KS
Posts: 3,121
Received 739 Likes on 484 Posts

Default

Originally Posted by FastMatt2
757 hp, warranty, and heat soak problems solved, 16K.... there going to sell allot of these cars. GOOD JOB!
There essentially is no "heat soak problem" with the base car. What there is, is an engine overheating issue due to water and oil temps being too high when driven aggressively on a road course for a period of time. This package does nothing to address that issue of the car going into limp mode due to overheating, and may in fact exacerbate that particular condition due to the increased hp and torque.

Where it will excel of course is on the drag strip; street racing, (stupid, just my humble opinion), and of course at Cars and Coffee.

Bish
Old 07-28-2015, 11:00 AM
  #14  
Snorman
Scraping the splitter.
Support Corvetteforum!
 
Snorman's Avatar
 
Member Since: Jun 2005
Posts: 8,115
Received 1,028 Likes on 486 Posts
St. Jude Donor '13-'14-'15

Default

If it generates more horsepower it's going to generate more heat to the cooling system. I don't think that flowing air over the blower housing is going to have much, if any, effect on coolant and oil temps.
But this is pretty awesome...757/777...very cool!
Just IMO.
S.
Old 07-28-2015, 11:05 AM
  #15  
Andy@A&ACorvette
Platinum Supporting Vendor
 
Andy@A&ACorvette's Avatar
 
Member Since: Sep 2001
Location: VENTURA Ca
Posts: 5,659
Likes: 0
Received 202 Likes on 125 Posts

Default

I'm surprised that will all their engineering capability that all they have done is add a better supercharger.
They should be quite capable of looking at the entire package and definitively solving the heating issues.
I applaud their 3 intercooler design but that will do nothing for the oil and water overheating. Heat soak, at the track, really is not the issue here.
C'mon Callaway, build a complete system that will fix the issues once and for all.
If you don't I, or another aftermarket manufacturer, surely will.
__________________
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!

A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com

A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7


SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT


Andy@AACorvette.com 805- 278 4107
Old 07-28-2015, 11:16 AM
  #16  
C6MagRed
Burning Brakes
 
C6MagRed's Avatar
 
Member Since: Sep 2004
Location: Central TX
Posts: 952
Received 8 Likes on 3 Posts

Default

Originally Posted by Andy@AandASuperchargers
I'm surprised that will all their engineering capability that all they have done is add a better supercharger.
They should be quite capable of looking at the entire package and definitively solving the heating issues.
I applaud their 3 intercooler design but that will do nothing for the oil and water overheating. Heat soak, at the track, really is not the issue here.
C'mon Callaway, build a complete system that will fix the issues once and for all.
If you don't I, or another aftermarket manufacturer, surely will.
I'm pretty sure that their relationship with GM is the limiting factor as regards the cooling issues. Obviously they have the engineering know how to address the known problems. Perhaps GM has a fix of their own coming soon (?)…

I applaud them for the work that they are doing for those that want this sort of upgrade, but desire a factory supported warranty… AandA can't say that… No other aftermarket company can either

Good job guys

Last edited by C6MagRed; 07-28-2015 at 11:18 AM. Reason: add info
Old 07-28-2015, 11:29 AM
  #17  
Robert R1
Burning Brakes
 
Robert R1's Avatar
 
Member Since: Jul 2005
Posts: 943
Received 168 Likes on 99 Posts

Default

Originally Posted by GCRoberts
I just want to make sure I understand this correctly. If you spend an additional $23,055, you can get the ZCR option (C7.R Edition Coupe) which gives you no performance enhancements at all and overheats on the track. Or you can spend an additional $16,995 and get a Z06 that's significantly more powerful and supposedly doesn't overheat?
Wow! Is GM really asking 23k for paint and stickers!?

Get notified of new replies

To Corvette Forum Scoop: Horsepower Figures for Callaway Z06 Announced

Old 07-28-2015, 11:38 AM
  #18  
four0nefive
Melting Slicks
 
four0nefive's Avatar
 
Member Since: May 2015
Location: Washington
Posts: 2,347
Received 381 Likes on 236 Posts
Default

Originally Posted by Robert R1
Wow! Is GM really asking 23k for paint and stickers!?
Well it's $23k over the base cause it's pretty much fully loaded. But I honestly don't know why you would spend that much when a Z07 can be had cheaper (even with the 3lz package). Funny thing to point out btw. Some guy was trying to sell his regular Z06 (stage 1 car, not sure on interior package) for $105k so he could buy a C7R Edition
Old 07-28-2015, 11:39 AM
  #19  
Destrukt
Got Boost?!
Support Corvetteforum!
 
Destrukt's Avatar
 
Member Since: Oct 2008
Location: Houston Texas
Posts: 1,271
Received 42 Likes on 31 Posts
St. Jude Donor '15-'16-'17-'18.'19

Default

Callaway Chris, does this price INCLUDE all shipping and handling fees back and forth between your shop and the dealership?
Old 07-28-2015, 11:47 AM
  #20  
four0nefive
Melting Slicks
 
four0nefive's Avatar
 
Member Since: May 2015
Location: Washington
Posts: 2,347
Received 381 Likes on 236 Posts
Default

Originally Posted by shayneusmc
Callaway Chris, does this price INCLUDE all shipping and handling fees back and forth between your shop and the dealership?
Nope


Quick Reply: Corvette Forum Scoop: Horsepower Figures for Callaway Z06 Announced



All times are GMT -4. The time now is 06:33 PM.