**LG Motorsports G7 sway bars with LG quiet endlink kit.**
#1
Former Vendor
Thread Starter
**LG Motorsports G7 sway bars with LG quiet endlink kit.**
We just finished up another test with our new LG C7 sway bar and endlink kit. Reduce body roll and increase grip with a new set of LG sway bar and adjustable endlinks.
Give us a call at the shop if we can help,
Give us a call at the shop if we can help,
#2
Premium Supporting Vendor
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Hi Guys,
Considering that the base C7 has no rear sway bar at all, these are a must for anyone doing more than grocery getting.
We tested these on our C7 and also on our C7 Z06 and made huge lap time improvements in both cases at MSR track here in Texas.
It is more than just lap times, it is a great firm feel around corners without affecting the ride quality.
Why have a Corvette if you don't want it to turn corners properly? I am still baffled as to why the base C7 has NO REAR SWAY BAR at all.
Our bars are larger than the Z51 bars and bolt right up in the stock location with no modifications.
Give us a call
https://www.lgmotorsports.com/corvet...sway-bars.html
Thanks
Lou gigliotti
LG Motorsports
972-429-1963
Considering that the base C7 has no rear sway bar at all, these are a must for anyone doing more than grocery getting.
We tested these on our C7 and also on our C7 Z06 and made huge lap time improvements in both cases at MSR track here in Texas.
It is more than just lap times, it is a great firm feel around corners without affecting the ride quality.
Why have a Corvette if you don't want it to turn corners properly? I am still baffled as to why the base C7 has NO REAR SWAY BAR at all.
Our bars are larger than the Z51 bars and bolt right up in the stock location with no modifications.
Give us a call
https://www.lgmotorsports.com/corvet...sway-bars.html
Thanks
Lou gigliotti
LG Motorsports
972-429-1963
Last edited by LG Motorsports; 05-03-2015 at 01:35 AM.