C7 Tech/Performance Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Vengeance C7 10.20@144 Video Inside...

Thread Tools
 
Search this Thread
 
Old 04-01-2014, 10:14 AM
  #1  
0Ron@Vengeance Racing
Former Vendor
Thread Starter
 
Ron@Vengeance Racing's Avatar
 
Member Since: Oct 2006
Location: Cumming Georgia
Posts: 2,050
Received 32 Likes on 19 Posts

Default Vengeance C7 10.20@144 Video Inside...

VR C7 Mod List

ECS Base Kit with Novi 1500- 14psi
VR Cam Kit- DOD Delete/Retain VVT
ARH 1 7/8 Long tube headers with CATTED X pipe
B&B Fusion Exhaust
Alky Control Methanol System
MGW Shifter with Billet Base
20" Toyo 888 Tires

STOCK SHORT BLOCK
STOCK CLUTCH
STOCK TRANS/DIFF/HALF SHAFTS

Passes made at South Georgia Motorsports Park
~900' DA

Soft launches/shifts as you can see in the video just getting a feel for the car and making sure it was going to stay together

NO NITROUS on these passes. Boost only= ~890RWHP

Will be back at the track in the next two weeks with drag radials and nitrous..

Enjoy

Old 04-01-2014, 10:46 AM
  #2  
mobius
Pro
 
mobius's Avatar
 
Member Since: Jun 2007
Location: Valdosta GA
Posts: 501
Received 3 Likes on 1 Post

Default

When were u there?
Old 04-01-2014, 11:29 AM
  #3  
ChucksZ06
Drifting
 
ChucksZ06's Avatar
 
Member Since: Jul 2009
Posts: 1,356
Received 55 Likes on 23 Posts

Default

That is great....drag radials will definitely get you in the 9's. I thought that was a good launch with those tires. Look forward to your progress on the car. Thanks for video.
Old 04-02-2014, 09:35 PM
  #4  
TonyC817
Instructor
 
TonyC817's Avatar
 
Member Since: Apr 2010
Posts: 220
Likes: 0
Received 5 Likes on 3 Posts
Default

nice! awesome mph and a good launch especially on a street tire
Old 04-03-2014, 01:02 PM
  #5  
Bad95killer
Pro
 
Bad95killer's Avatar
 
Member Since: Mar 2006
Location: Somewhere I Belong! OutSide
Posts: 704
Likes: 0
Received 0 Likes on 0 Posts
Default

Awesome job Ron and VR


peace
Old 04-03-2014, 03:03 PM
  #6  
Mardis Gras
Safety Car
Support Corvetteforum!
 
Mardis Gras's Avatar
 
Member Since: Jan 2006
Location: NOLA
Posts: 3,718
Received 37 Likes on 36 Posts

Default

Nicely done guys
Old 04-06-2014, 07:04 AM
  #7  
SteveDoten@ARH
Premium Supporting Vendor
 
SteveDoten@ARH's Avatar
 
Member Since: Aug 2008
Location: Deer Park NEW YORK
Posts: 1,964
Received 36 Likes on 32 Posts
Default

That is awesome
__________________

FIRST C7 IN THE 9's....ARH Equipped.

631-608-1986 ext. 101

Email: steve@americanracingheaders.com
Facebook: www.facebook.com/americanracingheaders
Web: www.AmericanRacingHeaders.com
USAF/OIF VETERAN
Old 04-10-2014, 09:28 AM
  #8  
0Daniel@Vengeance
Former Vendor
 
Daniel@Vengeance's Avatar
 
Member Since: Dec 2011
Location: Cumming Georgia
Posts: 2,559
Received 160 Likes on 107 Posts
Default

Thanks for all the kind words guys! It has been insanely busy at the shop, and our track is closed for NMCA this weekend, but we hope to hit the track ASAP with some stickier rubber and get into the 9's!
Old 04-10-2014, 12:13 PM
  #9  
PRE-Z06
Race Director

 
PRE-Z06's Avatar
 
Member Since: Dec 2006
Location: Fort Worth, Texas
Posts: 11,122
Received 2,054 Likes on 1,306 Posts

Default

Originally Posted by David@Vengeance
Thanks for all the kind words guys! It has been insanely busy at the shop, and our track is closed for NMCA this weekend, but we hope to hit the track ASAP with some stickier rubber and get into the 9's!
Looking forward to the single digit pass, Godspeed!
Old 04-15-2014, 07:43 PM
  #10  
schpenxel
Race Director
 
schpenxel's Avatar
 
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes on 1,053 Posts
St. Jude Donor '15

Default

Fuel system? Wasn't sure how much the factory direct injection system could handle..
Old 04-15-2014, 08:24 PM
  #11  
0Daniel@Vengeance
Former Vendor
 
Daniel@Vengeance's Avatar
 
Member Since: Dec 2011
Location: Cumming Georgia
Posts: 2,559
Received 160 Likes on 107 Posts
Default

Originally Posted by schpenxel
Fuel system? Wasn't sure how much the factory direct injection system could handle..
The pumps/lines/injectors/rails/etc are 100% stock. The fuel pump lobe on the camshaft is larger. We consider this a stock fuel system, but others may disagree.
Old 04-15-2014, 08:33 PM
  #12  
schpenxel
Race Director
 
schpenxel's Avatar
 
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes on 1,053 Posts
St. Jude Donor '15

Default

Originally Posted by David@Vengeance
The pumps/lines/injectors/rails/etc are 100% stock. The fuel pump lobe on the camshaft is larger. We consider this a stock fuel system, but others may disagree.
Interesting. I remember reading some threads prior to the C7 release that made it seem that the fuel system would be the limiting factor

800RWHP doesn't seem too awfully limited, but I am interested in your thoughts on the potential

Last edited by schpenxel; 04-15-2014 at 08:37 PM.
Old 04-15-2014, 08:59 PM
  #13  
0Ron@Vengeance Racing
Former Vendor
Thread Starter
 
Ron@Vengeance Racing's Avatar
 
Member Since: Oct 2006
Location: Cumming Georgia
Posts: 2,050
Received 32 Likes on 19 Posts

Default

Originally Posted by schpenxel
Interesting. I remember reading some threads prior to the C7 release that made it seem that the fuel system would be the limiting factor

800RWHP doesn't seem too awfully limited, but I am interested in your thoughts on the potential

Please keep in mind we are utilizing a dual nozzle Alky Control methanol system as well which lends to our fueling capabilities for big power.

Get notified of new replies

To Vengeance C7 10.20@144 Video Inside...




Quick Reply: Vengeance C7 10.20@144 Video Inside...



All times are GMT -4. The time now is 09:24 PM.