A&A Superchargers Production C7 Kit
#1
Le Mans Master
Thread Starter
A&A Superchargers Production C7 Kit
#7
Le Mans Master
Thread Starter
#8
Looks very nice. Does the standard kit coming with the V3 SI blower? I believe that the C7 kit only comes with self contained units, and not with the ones that the oil pan is drilled upon (V2), correct?
#9
Le Mans Master
Thread Starter
Yes this is the standard kit. I always use self contained though on all the cars we do. Its well worth the $150 upgrade.
#10
Platinum Supporting Vendor
Clean those tubes up and take another shot for the folks.
I also have a batch at the powder-coater (tubing) and anodizer (brackets)for those wanting the" Blacked Out" look.
I'm sure Fran will be doing one of those soon as well.
I also have a batch at the powder-coater (tubing) and anodizer (brackets)for those wanting the" Blacked Out" look.
I'm sure Fran will be doing one of those soon as well.
__________________
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
#12
Melting Slicks
Dang the BOV and breather look great sitting up by the blower. Andy, remember me, Doug Rippie did your kit on my 07' C6 a few years back. Please do not make your kit in matte black, that will be very bad for my savings account.
#14
Platinum Supporting Vendor
#19
Melting Slicks
Well done, and also anxious to see dyno sheets. You gunna run a catch can? People already are seeing oil in there intakes, and boosted will probably be worse,
#20
I just returned from the service dept. I have a 3lt Z51 and had oil in my intake. I took it in to be checked becuase I'm putting a super charger on in the coming weeks. A catch can sounds like a great investment.