Extra key
#1
Extra key
XTRA
How much is a extra or spare key.... We get two with purchase of car
but I am not comfortable with only two. Thanks, Bob, love our car
Torch red,black mirrors an spoiler, chrome wheels etc.....!
How much is a extra or spare key.... We get two with purchase of car
but I am not comfortable with only two. Thanks, Bob, love our car
Torch red,black mirrors an spoiler, chrome wheels etc.....!
The following users liked this post:
Art17 (03-30-2020)
#3
Team Owner
Member Since: Mar 2012
Location: Anger Island
Posts: 45,945
Received 3,290 Likes
on
1,400 Posts
St. Jude Donor '12-'13-'14-'15-'16-'17
Two isn't enough?
The following users liked this post:
Art17 (03-30-2020)
#4
Team Owner
Member Since: Aug 2007
Location: I live my life by 2 rules. 1) Never share everything you know. 2)
Posts: 136,148
Received 2,402 Likes
on
1,366 Posts
St. Jude Donor '11-'12-'13, '16-'17-'18
#5
Moderator
You gonna lose both at the same time?
The following users liked this post:
Art17 (03-30-2020)
The following users liked this post:
Art17 (03-30-2020)
#9
Melting Slicks
Member Since: Dec 2012
Location: St. Louis Metro East IL
Posts: 2,996
Received 1,298 Likes
on
859 Posts
Cost me $150 at a dealer for fob and key. The dealer will have to order the key after they verify ownership of your VIN. They will check registration or title and driver's license before ordering.
The following users liked this post:
Art17 (03-30-2020)
The following users liked this post:
Art17 (03-30-2020)
#11
Team Owner
Member Since: Aug 2007
Location: I live my life by 2 rules. 1) Never share everything you know. 2)
Posts: 136,148
Received 2,402 Likes
on
1,366 Posts
St. Jude Donor '11-'12-'13, '16-'17-'18
(Page 2-25 from the Owner's Manual)
Programming Transmitters to the Vehicle
Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
The vehicle can be reprogrammed
so that lost or stolen transmitters no
longer work. Each vehicle can have
up to eight transmitters programmed
to it.
Programming with a Recognized
Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
1. The vehicle must be off and both
the recognized and new
transmitters must be with you.
2. Remove key base from
recognized RKE transmitter.
3. Place the recognized transmitter
in the cupholder.
4. Insert the vehicle key into the
key cylinder above the license
plate.
5. Open the hatch/trunk.
6. Turn the key five times within
ten seconds.
7. The DIC displays READY FOR
REMOTE # 3 or 4, up to 8.
8. Place the new transmitter in the
steering column transmitter
pocket with the buttons facing up
and the base toward the opening
facing the passenger side.
9. Press the ENGINE START/
STOP button.
10. The DIC displays READY FOR
REMOTE # 4 or 5, up to 8.
11. Press K on each newly
programmed transmitter to
complete the process
.
12. To program additional
transmitters, repeat Steps 8-11.
Press and hold the ENGINE
START/STOP button for
12 seconds if programming is
complete.
Return the key base back into
the RKE transmitter.
Programming
Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
The vehicle can be reprogrammed
so that lost or stolen transmitters no
longer work. Each vehicle can have
up to eight transmitters programmed
to it.
Programming with a Recognized
Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
1. The vehicle must be off and both
the recognized and new
transmitters must be with you.
2. Remove key base from
recognized RKE transmitter.
3. Place the recognized transmitter
in the cupholder.
4. Insert the vehicle key into the
key cylinder above the license
plate.
5. Open the hatch/trunk.
6. Turn the key five times within
ten seconds.
7. The DIC displays READY FOR
REMOTE # 3 or 4, up to 8.
8. Place the new transmitter in the
steering column transmitter
pocket with the buttons facing up
and the base toward the opening
facing the passenger side.
9. Press the ENGINE START/
STOP button.
10. The DIC displays READY FOR
REMOTE # 4 or 5, up to 8.
11. Press K on each newly
programmed transmitter to
complete the process
.
12. To program additional
transmitters, repeat Steps 8-11.
Press and hold the ENGINE
START/STOP button for
12 seconds if programming is
complete.
Return the key base back into
the RKE transmitter.
Programming
The following users liked this post:
Art17 (03-30-2020)
#13
Le Mans Master
Member Since: Dec 1999
Location: One Hour From Boston!
Posts: 6,408
Received 4,684 Likes
on
1,862 Posts
Are you asking for an additional FOB or an additional key? I bet a duplicate of the key can be made at a hardware store for a couple dollars....
#14
Team Owner
Member Since: Aug 2007
Location: I live my life by 2 rules. 1) Never share everything you know. 2)
Posts: 136,148
Received 2,402 Likes
on
1,366 Posts
St. Jude Donor '11-'12-'13, '16-'17-'18
#15
Moderator/Tech Contributor
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,235
Received 3,822 Likes
on
2,066 Posts
2015 C7 of the Year Finalist
Of course you could refer to this in the sticky in the DIY, FAQ's and TIPS forum.
http://forums.corvetteforum.com/c7-g...s-and-rke.html
Elmer
http://forums.corvetteforum.com/c7-g...s-and-rke.html
Elmer
#16
Melting Slicks