Calling out any C7 owner to run my C6!
01-08-2014, 10:44 PM
#721
01-08-2014, 10:48 PM
#722
Instructor
Thread Starter
Member Since: Mar 2010
Location: Debary Florida
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
01-08-2014, 11:01 PM
#723
Scraping the splitter.
He can lick his wounds for now.
It's not going to get any better for the C6 from a roll. In fact, it'll very likely be worse.
My buddy's '13 GT500 got creamed by my '13 GT-R from a dig, but walked the GT-R pretty damn hard from a roll as he traps 5-6 mph faster.
S.
01-08-2014, 11:20 PM
#724
Because you made it seem like C7 owners had big heads. Then, you get smacked down at the track. You were quiet for a little while. Now, it's about how the C7 can't take C6Z. This has NOTHING to do with the thread. Your thread ended when you got owned at the track. Suck it up, take it like a man, and just let it go. You are a crying baby at this point.
01-08-2014, 11:23 PM
#725
Nothing personal here, but I don't believe the C7 is as fast as people are claiming it to be any one want to run my stock LS3, stock vs stock, on video and prove me wrong?
FYI I'm not saying the C6 is faster than the C7. That would be stupid. I don't think they will "Smoke","Murder","Walk" an LS3 like a Z06 would though.
FYI I'm not saying the C6 is faster than the C7. That would be stupid. I don't think they will "Smoke","Murder","Walk" an LS3 like a Z06 would though.
01-08-2014, 11:41 PM
#726
Team Owner
01-08-2014, 11:51 PM
#727
Melting Slicks
The GS was modded with an LS7 inlet/filter setup, tune and ZR1 wheel/tire setup. He has Michelin PSS's on it. On Friday night when I went 11.6 at 119.2, the GS went 12.0 at 116-117 (forget what he told me and didn't see his pass). The GS owner is a real nice guy and does a lot of racing with his car. He is somewhat in awe of how well our C7 A6's run at the track. FWIW...he said his best stock time was 12.6.
Don't worry, I'm quite sure you're trying to find a reason for why you were so wrong in your "1-2 cars" C7 advantage prediction.
S.
Don't worry, I'm quite sure you're trying to find a reason for why you were so wrong in your "1-2 cars" C7 advantage prediction.
S.
01-09-2014, 12:03 AM
#728
Scraping the splitter.
Using this post only as a reference and nothing to do with the race results. Just curious why no one has commented on why the guy with the GS would run a ZR1 wheel/ tire set up? Those chrome 19/ 20's are no advantage at all in a 1/4 mile. Stock 18" / 19" 5 spoke GS wheels would be better
They also weren't chrome, they were gloss black. Like the attached pic. He was parked by me and I looked at the rear tire. It was a Michelin PSS 335-25/20.
S.
01-09-2014, 12:16 AM
#731
Scraping the splitter.
01-09-2014, 12:19 AM
#733
Team Owner
01-09-2014, 12:27 AM
#736
Team Owner
to remove them and save 20 plus pounds of rotating weight. Over 5 maybe even six pounds each saving's on the big rear going to a mono block forged wheel.
For a drag racer to sport those is not smart. It has to cost at least a couple tenths.
01-09-2014, 12:28 AM
#737
Melting Slicks
Member Since: Nov 2013
Location: Palm Beach County FL
Posts: 2,048
Likes: 0
Received 27 Likes
on
19 Posts
Reading this thread makes me want to get a A6.
but then I think about driving my M6 Z06, and reminds me how much fun it can be when I drive spirited
then I remember how horrible it is driving it in traffic as an everyday car.
lol
nice thread, if anything I learned the auto C7s are 11 second cars
but then I think about driving my M6 Z06, and reminds me how much fun it can be when I drive spirited
then I remember how horrible it is driving it in traffic as an everyday car.
lol
nice thread, if anything I learned the auto C7s are 11 second cars
01-09-2014, 12:33 AM
#738
Scraping the splitter.
Those are so heavy esp in chrome. The one and only mod so far was
to remove them and save 20 plus pounds of rotating weight. Over 5 maybe even six pounds each saving's on the big rear going to a mono block forged wheel.
For a drag racer to sport those is not smart. It has to cost at least a couple tenths.
to remove them and save 20 plus pounds of rotating weight. Over 5 maybe even six pounds each saving's on the big rear going to a mono block forged wheel.
For a drag racer to sport those is not smart. It has to cost at least a couple tenths.
And LMFAO at "20 plus pounds of rotating weight" being worth "at least a couple tenths".
S.
01-09-2014, 12:46 AM
#739
Team Owner
brought in a little bird and placed it by me.
So I went to the pet store and now she sports a collar with a bell.
Should not allow a house cat to catch birds. The birds have enough problems.
This cat fetches like a dog and will dive off the steps chasing stuff then brings it back.
01-09-2014, 12:49 AM
#740
Team Owner
I was making an informed comment nothing directed at you either!Do you have any "data" that they aren't plus who said anything about a Grandsport wheel?
I was comparing to a MONO BLOCK FORGED
Least think a second before you chirp!
Plus rotating weight removed makes more impact than you taking 20 pounds off the seat!
Less weight for the torque of the engine to turn.
ON Each rotation so after 1/4 mile it adds up!
Yes those wheels slow your car down.
Last edited by 3 Z06ZR1; 01-09-2014 at 01:09 AM.