C7 General Discussion General C7 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

If you are not doing z51 - what wheels?

Old 09-07-2013, 11:28 PM
  #1  
Glen e
Race Director
Thread Starter
 
Glen e's Avatar
 
Member Since: Sep 2013
Location: Ft Lauderdale
Posts: 10,404
Received 907 Likes on 473 Posts
Tech Contributor

Default If you are not doing z51 - what wheels?

I know we are in the minority, (70% or so buying z51) - but what's your choice for the wheels out of the 3 avail? I can't decide

1. if I should get the basic silver and add aftermarlet wheels later, doing a 19 and 20 change....

2. get the machine face - but damn for what you get, they are a bit expensive...really can't find pics on here either at events....

3. Not a chrome guy...

so what are you doing, and why?

If you've seen the basic wheel, does it look ok?
Old 09-07-2013, 11:51 PM
  #2  
MikeyTX
Team Owner

Support Corvetteforum!
 
MikeyTX's Avatar
 
Member Since: Sep 2005
Location: Big Bend Country, TX
Posts: 29,114
Received 2,186 Likes on 1,337 Posts
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15- '16-'17-‘18-‘19-'20-'21
NCM Lifetime Member


Default

Stock wheels. The aftermarket ones I bought for the C6 from LGMotorsports will fit just fine.
Old 09-08-2013, 12:45 AM
  #3  
Turbobndt
Instructor
 
Turbobndt's Avatar
 
Member Since: Aug 2001
Location: Shreveport LA
Posts: 179
Likes: 0
Received 0 Likes on 0 Posts

Default

I'm going to run with the silver painted for awhile. I couldn't justify the extra cost for the others and still have wheels like everyone else. If I get tired of the base wheels down the road, then I'll look to the aftermarket to get something different.
(My car is Crystal Red.....if that matters.)
Old 09-08-2013, 03:09 AM
  #4  
jr3
Safety Car
 
jr3's Avatar
 
Member Since: Apr 2009
Location: Area Z51
Posts: 3,906
Received 60 Likes on 39 Posts

Default

These wheels would look great on the C7... Razor sharp design just like the car.





They would look very good on Laguna Blue.


Last edited by jr3; 09-08-2013 at 03:12 AM.
Old 09-08-2013, 03:45 AM
  #5  
Dusty Starbucks
Racer
 
Dusty Starbucks's Avatar
 
Member Since: Aug 2013
Location: San Jose California
Posts: 487
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by jr3
These wheels would look great on the C7... Razor sharp design just like the car.
I totally agree with you, HREs are gorgeous. Expect to throw down about 2 grand a wheel and after all the options already bought, most of us would be into the 80+k range. I thought about em, and will wait. Besides I will need something every so often to add to the car .
Old 09-08-2013, 10:56 AM
  #6  
Mike Campbell
Le Mans Master

 
Mike Campbell's Avatar
 
Member Since: Jan 2002
Location: Ft. Myers FL
Posts: 5,746
Received 1,066 Likes on 591 Posts

Default

I'd get the standard painted wheels with either the base or Z51 and wait until WCC comes out with their wheel exchange. Then I'd go with those which for one are a lot cheaper than ordering them and from my own experience the chrome plate job was way better...both on my C5 and my C6.
Old 09-08-2013, 10:59 AM
  #7  
Patriot77
Drifting
Support Corvetteforum!
 
Patriot77's Avatar
 
Member Since: Aug 2013
Location: Omaha
Posts: 1,303
Received 11 Likes on 10 Posts
Default

Hard for me to fathom not spending the money for the Z51 package. It really sets the car apart from the crowd. Same goes for the NPP. But as they always say "to each his own".
Old 09-08-2013, 11:00 AM
  #8  
Glen e
Race Director
Thread Starter
 
Glen e's Avatar
 
Member Since: Sep 2013
Location: Ft Lauderdale
Posts: 10,404
Received 907 Likes on 473 Posts
Tech Contributor

Default

do oyu have a link for WCC?

and yes, the Z51 is a great price but I want softest ride possible and other than the wheels don't have a need for any of the upgrades:

http://blogs.cars.com/kickingtires/2...rst-drive.html


But I'll probably hold on to my take offs so I can return the car to stock to sell. These are my favorites for now about $300 per wheel: TSW Machine Face Nurburgrings:

Last edited by Glen e; 09-08-2013 at 11:03 AM.
Old 09-08-2013, 12:19 PM
  #9  
Larry/car
Race Director
 
Larry/car's Avatar
 
Member Since: May 2008
Location: Manheim Pennsylvania
Posts: 10,742
Received 621 Likes on 423 Posts

Default

Many are ordering C7's with the experience they had with the C6. As the C7 autos go into service some of the options now being ordered will change. After all, GM tells us the C7 is totally new from the ground up. Now back to the original question, I am planning to order the base suspension with the standard silver wheels. I will trade the car for another wheel design when the time is right. Yes trade the car for improved/nicer wheels in a year or two. After operating the new car my option list probably will change as experience with the car improves.
Old 09-08-2013, 12:24 PM
  #10  
VETFEVER
Race Director
Support Corvetteforum!
 
VETFEVER's Avatar
 
Member Since: May 2007
Location: Feverish All Over
Posts: 10,754
Received 659 Likes on 443 Posts

Default

Originally Posted by Glen e
do oyu have a link for WCC?

and yes, the Z51 is a great price but I want softest ride possible and other than the wheels don't have a need for any of the upgrades:

http://blogs.cars.com/kickingtires/2...rst-drive.html


But I'll probably hold on to my take offs so I can return the car to stock to sell. These are my favorites for now about $300 per wheel: TSW Machine Face Nurburgrings:
I run the TSW's on my C6, but are you certain the C7 wheels will be the same or close in widths and offset such that the TSW's will be a good fit?
Old 09-08-2013, 12:43 PM
  #11  
Glen e
Race Director
Thread Starter
 
Glen e's Avatar
 
Member Since: Sep 2013
Location: Ft Lauderdale
Posts: 10,404
Received 907 Likes on 473 Posts
Tech Contributor

Default

Originally Posted by VETFEVER
I run the TSW's on my C6, but are you certain the C7 wheels will be the same or close in widths and offset such that the TSW's will be a good fit?
No...not at all sure...but I'll find something like this design....I see lots of wheels being made to fit the C7 in a year or so. It's a huge market, I don't see the wheels being offered by Chev as being enuf for those of use that like to mod....

Get notified of new replies

To If you are not doing z51 - what wheels?



Thread Tools
Search this Thread
Quick Reply: If you are not doing z51 - what wheels?



All times are GMT -4. The time now is 11:23 AM.