Owner's Manual - It's UP!!!
08-26-2013, 08:59 PM
#5
Last edited by BlueOx; 08-26-2013 at 09:02 PM.
08-26-2013, 09:07 PM
#7
Interesting stuff for a user's manual...
Racing/Track Brake Burnish
Procedure
{Caution
Brake pedal fade will occur during
this track burnish procedure and
can cause brake pedal travel and
force to increase. This could
extend stopping distance until the
brakes are fully burnished.
1. Apply the brakes 25 times
starting at 100 km/h (60 mph) to
50 km/h (30 mph) while
decelerating at 0.4 g. This is a
medium brake application. Drive
for at least 1 km (0.6 mi)
between applying the brakes.
This first step may be skipped if
there are more than 320 km
(200 mi) on the brake pads.
2. Repeatedly apply the brakes
from 100 km/h (60 mph) to
25 km/h (15 mph) while
decelerating at 0.8 g. This is a
hard brake application, without
activating the Antilock Brake
System (ABS). Drive for at least
1 km (0.6 mi) between stops.
Repeat until the brake pedal
travel starts to increase.
Depending on conditions, this
should take no longer than 25
brake applications.
3. Cool down: Drive at 100 km/h
(60 mph) for approximately
15 km (10 mi) without using the
brakes.
4. Apply the brakes 25 times from
100 km/h (60 mph) to 50 km/h
(30 mph) while decelerating at
0.4 g. This is a medium brake
application. Drive for at least
1 km (0.6 mi) between
applications.
Procedure
{Caution
Brake pedal fade will occur during
this track burnish procedure and
can cause brake pedal travel and
force to increase. This could
extend stopping distance until the
brakes are fully burnished.
1. Apply the brakes 25 times
starting at 100 km/h (60 mph) to
50 km/h (30 mph) while
decelerating at 0.4 g. This is a
medium brake application. Drive
for at least 1 km (0.6 mi)
between applying the brakes.
This first step may be skipped if
there are more than 320 km
(200 mi) on the brake pads.
2. Repeatedly apply the brakes
from 100 km/h (60 mph) to
25 km/h (15 mph) while
decelerating at 0.8 g. This is a
hard brake application, without
activating the Antilock Brake
System (ABS). Drive for at least
1 km (0.6 mi) between stops.
Repeat until the brake pedal
travel starts to increase.
Depending on conditions, this
should take no longer than 25
brake applications.
3. Cool down: Drive at 100 km/h
(60 mph) for approximately
15 km (10 mi) without using the
brakes.
4. Apply the brakes 25 times from
100 km/h (60 mph) to 50 km/h
(30 mph) while decelerating at
0.4 g. This is a medium brake
application. Drive for at least
1 km (0.6 mi) between
applications.
08-26-2013, 09:26 PM
#10
Le Mans Master
08-26-2013, 09:40 PM
#15
Burning Brakes
Dang.. I was hoping that the "valet" mode would include a 4 cylinder deactivation or limp mode to keep from racing engine... but looks like it's not there... Dang
08-26-2013, 10:21 PM
#16
Instructor
Member Since: Aug 2001
Location: Shreveport LA
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
08-26-2013, 10:59 PM
#18
My order is 1100 so I have plenty of time to read up on the car.
08-26-2013, 11:11 PM
#19
Burning Brakes
One more official manual still to come. This manual references the Infotainment Manual with information on the nav and entertainment systems. I searched around on their server but couldn't find it yet.
08-26-2013, 11:18 PM
#20
Instructor
Member Since: Aug 2013
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts