Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

[Z06] Noob ? on injectors

Thread Tools
 
Search this Thread
 
Old 07-24-2013, 05:27 PM
  #1  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default Noob ? on injectors

Well i just installed some ls9 injectors into my ls7 manifold. It seems there is some up and down play. Is this normal or should it be a tight fit. Also o rings are new orange on bottom. I cant compare to ls7 injectors because i did not purchase the manifold with injectors. I push the injectors all the way down the manifold put i can also push them back into the rail too.
Old 07-24-2013, 06:44 PM
  #2  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default





this how they look all the way down is this right or will it be ok in other words
Old 07-24-2013, 07:18 PM
  #3  
0Anthony @ LGMotorsports
Former Vendor
 
Anthony @ LGMotorsports's Avatar
 
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes on 300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13


Default

Should be injector clips on the top side holding them to the rail....do you have those?
Old 07-24-2013, 07:24 PM
  #4  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default

no didnt come with them you know the part number or where i can get them from

If anyone has some lmk
Old 07-25-2013, 11:02 AM
  #5  
0Anthony @ LGMotorsports
Former Vendor
 
Anthony @ LGMotorsports's Avatar
 
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes on 300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13


Default

Originally Posted by tdi_hatch
no didnt come with them you know the part number or where i can get them from

If anyone has some lmk


24503227 GM PN
Old 08-11-2013, 03:38 AM
  #6  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default




i have ls9 injectors on my ls7 manifold and all the injectors sit at diiferent heights is this normal or ok.
Old 08-11-2013, 03:38 AM
  #7  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default

basically some sit higher up than others is this ok and i have alll the retainers on with new seals
Old 08-16-2013, 12:51 AM
  #8  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default

no replies anyone out there got a idea or am i ok
Old 08-16-2013, 07:17 AM
  #9  
Undy
Safety Car

 
Undy's Avatar
 
Member Since: Dec 1999
Location: Virginia Beach, VA & Port Charlotte, FL (snowbird)
Posts: 4,406
Received 1,095 Likes on 578 Posts

Default No LS9 injectors for me.

When I was looking for injectors for my build I ended up buying a used set of LS9 injectors. Afterwards further research revealed that they're not ideal for the LS7. The LS9 injectors are designed for the supercharged LS9 manifold. The LS9's blower manifold requires a different fuel spray pattern (spray angle) then any LS normally aspirated manifold. I was further warned about the LS9 injector spray hitting the side walls of the N/A manifold's intake ports before it gets to the intake valve. This inhibits proper atomization and droplets will form as the fuel drips down off the intake walls. Definitely not an ideal situation. I promptly sold the injectors.

FWIW, I went with a set of 60# brand new Bosch injectors for a LS2, along with the proper LS2 fuel rail.
Old 08-16-2013, 03:53 PM
  #10  
tdi_hatch
Instructor
Thread Starter
 
tdi_hatch's Avatar
 
Member Since: Mar 2008
Location: houston texas
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts
Default

well i have issues with it hitting anything just the fact each injectors sits at a different height in each port. I was wondering if it would effect anything also plenty of tuner can tune these injectors on ls7s

i know of 2 people running them no issues

Get notified of new replies

To Noob ? on injectors




Quick Reply: [Z06] Noob ? on injectors



All times are GMT -4. The time now is 05:54 AM.