[Z06] Looks what the UPS man brought today :)
#1
Safety Car
Thread Starter
Looks what the UPS man brought today :)
Look what the nice UPS man brought today. New custom heads with only top notch parts for my 2007 Z06 from Texas Speed & Performance. My valve train is not noisy at all but this is (cheaper) insurance.
Installation planned for Thursday.
Installation planned for Thursday.
Last edited by andy82; 03-05-2013 at 07:50 PM.
#3
Good to see someone else taking steps to protect themselves from the LS7 valve issue.
If we keep going like this, pretty soon we'll have this whole thing licked.
At least in here anyway.
Every car which has it's heads fixed, is another car which is out of the running for the broken stock exhaust valve club.
So yours in one that we KNOW won't be described in here in a post showing pics of a windowed block, as being the next example of GM's LS7 valve train mess.
Congrats on the new heads and let us know how the install comes out.
If we keep going like this, pretty soon we'll have this whole thing licked.
At least in here anyway.
Every car which has it's heads fixed, is another car which is out of the running for the broken stock exhaust valve club.
So yours in one that we KNOW won't be described in here in a post showing pics of a windowed block, as being the next example of GM's LS7 valve train mess.
Congrats on the new heads and let us know how the install comes out.
Last edited by '06 Quicksilver Z06; 03-05-2013 at 11:24 PM.
#4
Safety Car
Hey Andy
They look beautiful!!! You have the part number of the one's you got?
I really want to get a set too. I've already talked to them more than once. Did you get any upgrades for valves or springs? Keep us posted on how the install goes. Good luck.
They look beautiful!!! You have the part number of the one's you got?
I really want to get a set too. I've already talked to them more than once. Did you get any upgrades for valves or springs? Keep us posted on how the install goes. Good luck.
#5
Safety Car
Thread Starter
As far as I can see the part number is PRCLS76B265. I had a longer conversation with TSP and went with whatever they recommended as "bullet proof" in terms of valves and springs. These are not refurbished LS7 heads, but a new casting. I also opted for a little more compression. They came highly recommended, were very knowledgeable and helpful.
#7
Team Owner
My 285ccs are still working great.
#8
How long have you been working on motors?
#11
Safety Car
Thread Starter
#12
#13
Le Mans Master
Very nice, how long did it take from ordering to receiving?
Also, how much was milled and do you know the expected comp. Ratio you will have?
Thanks
Also, how much was milled and do you know the expected comp. Ratio you will have?
Thanks
Last edited by RedZ4me; 03-05-2013 at 11:46 PM.
#14
Racer
I order mine on the 2/12 and they shipped on 2/20. Alot quicker than the route my buddy went with. He is still waiting on his oem heads to come back from the west coast. But you gotta go where your money will take you...
#16
#18
Drifting
Smart move Andy! As with everything you do, you went with the best! You're car will be keeping mine company at Abel!
RichieRich, you guys are getting a bunch of high end rides in there lately! Between just Andy and my ride that's probably $300k+ worth of vette in your shop. Add on the other 10 or so that you had in for service last week when I was there and your probably pushing a mil, mil and a half worth of vettes alone at one time in your shop for service! Not bad for a so called "small town" dealer
RichieRich, you guys are getting a bunch of high end rides in there lately! Between just Andy and my ride that's probably $300k+ worth of vette in your shop. Add on the other 10 or so that you had in for service last week when I was there and your probably pushing a mil, mil and a half worth of vettes alone at one time in your shop for service! Not bad for a so called "small town" dealer
#20
Supporting Vendor
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
Smart move Andy! As with everything you do, you went with the best! You're car will be keeping mine company at Abel!
RichieRich, you guys are getting a bunch of high end rides in there lately! Between just Andy and my ride that's probably $300k+ worth of vette in your shop. Add on the other 10 or so that you had in for service last week when I was there and your probably pushing a mil, mil and a half worth of vettes alone at one time in your shop for service! Not bad for a so called "small town" dealer
RichieRich, you guys are getting a bunch of high end rides in there lately! Between just Andy and my ride that's probably $300k+ worth of vette in your shop. Add on the other 10 or so that you had in for service last week when I was there and your probably pushing a mil, mil and a half worth of vettes alone at one time in your shop for service! Not bad for a so called "small town" dealer
It's only early March so I'm willing to bet that come May/June we will be packed full of Corvettes again. Good thing we are in the middle of drawing up plans for a remodel and expansion of my Service Dept.
I have always said that my Corvette customers are the reason that I love my job so much. I have so many long time (and new) loyal customers that I get to interact with on a daily basis, along with many more that I have made life long friends with, that I never wake up not wanting to go to work.
RICH