[Z06] My Z06 is getting some upgrades...
#21
Former Vendor
#26
Team Owner
Thread Starter
No since I already made up my mind that I will be getting this upgrade and the SS exhaust valves. That new GM TSB made the mind up for me. I was thinking GM would step up, but the TSB was a HUGE let down and I pulled the trigger.
#31
Team Owner
Very nice. I'm looking forward to the results.
#32
Team Owner
So what were the numbers??
#33
Team Owner
Thread Starter
#34
Team Owner
Thread Starter
550 to the wheels!!! with a mild cam!! Good job Speed Inc.
Video and graph posted in original post (first page)
Video and graph posted in original post (first page)
#36
Burning Brakes
Nice work ! That car should be a blast to drive on and off the track !
I would much rather have a cam that size with good street mannors then 600 rwhp and a regular pain in the ***.
Enjoy
I would much rather have a cam that size with good street mannors then 600 rwhp and a regular pain in the ***.
Enjoy
#38
Le Mans Master
Cam lift or top secret??
#39
For me, it was coming to the realization that if I wanted to make it into 10 second territory, I was going to eventually end up busting something trying to do it stock, and in addition to that, my aftermarket warranty was not going to cover it.
Congrats again on the build.
So these are stock castings that Texas Speed did the work on?
When I came to the decision to have my heads done, they were one of the companies I spent a good deal of time on the phone with, as I was going to have them do my stock heads with bronze valve guides and SS valves.
Ultimately, I went in a different direction, but I am glad to see that you have strengthened your top end, and I added you to the listing.
http://forums.corvetteforum.com/c6-z...st-valves.html
#40
Team Owner
Thread Starter
Everybody has a tipping point, a watershed moment.
For me, it was coming to the realization that if I wanted to make it into 10 second territory, I was going to eventually end up busting something trying to do it stock, and in addition to that, my aftermarket warranty was not going to cover it.
Congrats again on the build.
So these are stock castings that Texas Speed did the work on?
When I came to the decision to have my heads done, they were one of the companies I spent a good deal of time on the phone with, as I was going to have them do my stock heads with bronze valve guides and SS valves.
Ultimately, I went in a different direction, but I am glad to see that you have strengthened your top end, and I added you to the listing.
http://forums.corvetteforum.com/c6-z...st-valves.html
For me, it was coming to the realization that if I wanted to make it into 10 second territory, I was going to eventually end up busting something trying to do it stock, and in addition to that, my aftermarket warranty was not going to cover it.
Congrats again on the build.
So these are stock castings that Texas Speed did the work on?
When I came to the decision to have my heads done, they were one of the companies I spent a good deal of time on the phone with, as I was going to have them do my stock heads with bronze valve guides and SS valves.
Ultimately, I went in a different direction, but I am glad to see that you have strengthened your top end, and I added you to the listing.
http://forums.corvetteforum.com/c6-z...st-valves.html
Thanks much!!