[Z06] [VIDEO]Katech Torquer cam, headers and tune goes 10.67 @ 132mph on drag radials
#1
Premium Supporting Vendor
Thread Starter
[VIDEO]Katech Torquer cam, headers and tune goes 10.67 @ 132mph on drag radials
Mods are: Katech Torquer Cam Kit, LG Pro's and BFG Drag Radials
1.611
4.526
6.921
103.82
8.956
10.672
132.14
http://www.youtube.com/watch?v=SLjoAg4NYBE
Way to go Rob!!!
Rob states:
132mph trap is the same as many other cars nearing "600rwhp" More proof that chassis dynos are for internet marketing. This is what a true 600bhp looks like.
1.611
4.526
6.921
103.82
8.956
10.672
132.14
http://www.youtube.com/watch?v=SLjoAg4NYBE
Way to go Rob!!!
Rob states:
The cam is a great performer and very docile on the way home
from the track
from the track
#2
Burning Brakes
#5
Le Mans Master
WOW! I love my Katech car!
Jim
Jim
#8
Burning Brakes
#10
Premium Supporting Vendor
Thread Starter
#12
Burning Brakes
Member Since: Sep 2007
Location: St. Louis MO
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
#16
Melting Slicks
Mods are: Katech Torquer Cam Kit, LG Pro's and BFG Drag Radials
1.611
4.526
6.921
103.82
8.956
10.672
132.14
http://www.youtube.com/watch?v=SLjoAg4NYBE
Way to go Rob!!!
Rob states:
132mph trap is the same as many other cars nearing "600rwhp" More proof that chassis dynos are for internet marketing. This is what a true 600bhp looks like.
1.611
4.526
6.921
103.82
8.956
10.672
132.14
http://www.youtube.com/watch?v=SLjoAg4NYBE
Way to go Rob!!!
Rob states:
132mph trap is the same as many other cars nearing "600rwhp" More proof that chassis dynos are for internet marketing. This is what a true 600bhp looks like.
#17
Le Mans Master
Katech upgraded my car but it has parts from LG, MTI, etc. Some installed by Katech.
Jim
#19
Drifting
Furman and Ranger did 130 and 129.5 mp/h respectively on a stock cam and car. Me, Carlos(Myhardtop) ,Jorday ,did 134.5 and 133 mp/h and 132.8 mp/h with a bolt-ons car stock cam. A bolt-on car should made what 40-50 rwhp more than a stock one ?
Yes I think 40-50 rwhp are good for +-4 mp/h in the 1/4. I know all of us have raced is stock cam with a good DA.
But again any cammed car never proved to be better than a stock one in the 1/4 in my sens with the same weather condition.
That's my opinion
Sébast
Yes I think 40-50 rwhp are good for +-4 mp/h in the 1/4. I know all of us have raced is stock cam with a good DA.
But again any cammed car never proved to be better than a stock one in the 1/4 in my sens with the same weather condition.
That's my opinion
Sébast
#20
Thanks.
Tires Are Extreme Drag BFGs 295.35.18 on aftermarket 10.5 inch C-5 Z06 Rims. I am not certain this is the correct tire.
I am going to make some passes with the Mickey's next week as the BFGs will break loose if I shift or launch to hard.
I will post the results.
Tires Are Extreme Drag BFGs 295.35.18 on aftermarket 10.5 inch C-5 Z06 Rims. I am not certain this is the correct tire.
I am going to make some passes with the Mickey's next week as the BFGs will break loose if I shift or launch to hard.
I will post the results.