[Z06] Details of the LS7 problem I was referring to...
11-24-2005, 10:56 PM
#1
Racer
Thread Starter
Member Since: Oct 2004
Location: Whitby Ontario
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Details of the LS7 problem I was referring to...
Here are the details I got about the problem I was talking about in the thread that got locked...
http://www.ls2.com/forums/showthread...hreadid=311446
Originally posted by CHRISPY
Several motors have dropped valves. They are running lash caps on the intake valves as the stock titanium intake valves do not have steel tips.
(There are no lash caps on the exhaust valves)
Why they would put a lash cap and a non steel tipped titanium valve on a motor like this I have no idea (supply issues?)
Several motors have dropped valves. They are running lash caps on the intake valves as the stock titanium intake valves do not have steel tips.
(There are no lash caps on the exhaust valves)
Why they would put a lash cap and a non steel tipped titanium valve on a motor like this I have no idea (supply issues?)
11-24-2005, 11:04 PM
#3
Safety Car
It is not an isolated incident either and is not limited to bottom or top end.
That is all I am saying, wait a while and you'll hear what is going on.
Thanks,
Chris
Now this is different from what my buddy Chris is saying........now I am getting confused. I'm going for another ride!!
That is all I am saying, wait a while and you'll hear what is going on.
Thanks,
Chris
Now this is different from what my buddy Chris is saying........now I am getting confused. I'm going for another ride!!
Last edited by vegasdude; 11-24-2005 at 11:08 PM.
11-24-2005, 11:56 PM
#4
Safety Car
Just curious, but they tested this engine on a 24 hour basis several times and never had this problem so I am thinking that someone (not You) do not know what the heck they are talking about. So I will leave it at that....................
11-25-2005, 05:33 AM
#8
MONARTOR
....proof is not this..
