Fuel Rails that work with oem manifold?
03-22-2016, 10:00 AM
#1
Racer
Thread Starter
Fuel Rails that work with oem manifold?
I'm in search of fuel rails that will work with the stock 08 ls3 manifold. Does anyone have any input as to which ones will work? It's more for aesthetics than anything as I clean up my engine bay. I am looking for red to match what I have started.
I see these in black: http://www.jegs.com/p/Holley/Holley-...13534/10002/-1
Thanks for any help.
I see these in black: http://www.jegs.com/p/Holley/Holley-...13534/10002/-1
Thanks for any help.
Last edited by MDSilverVette; 03-22-2016 at 10:02 AM.
The following users liked this post:
MDSilverVette (03-24-2016)
03-22-2016, 11:18 AM
#5
Racer
Thread Starter
From what I have seen these work for 08+ C6's also.
03-24-2016, 08:34 PM
#6
Race Director
Member Since: Aug 2005
Location: Hudson WI
Posts: 13,598
Received 181 Likes
on
162 Posts
NCM Sinkhole Donor
I think I'll go with these...but I still need the crossover part, correct?
http://www.summitracing.com/parts/aei-14115/overview/
http://www.summitracing.com/parts/aei-14115/overview/
03-24-2016, 11:57 PM
#7
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
Check out the Holley ones also.
03-25-2016, 08:52 AM
#9
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
I like black
The following users liked this post:
timd38 (03-25-2016)
03-25-2016, 08:56 AM
#10
Racer
Thread Starter
I suppose I could do these and then change the manifold cover so the rails will stand out in black and not blend in. http://www.jegs.com/p/Holley/Holley-...13534/10002/-1
03-25-2016, 02:26 PM
#12
Racer
Thread Starter
03-31-2016, 09:39 AM
#15
Racer
Thread Starter
03-31-2016, 10:04 AM
#16
Race Director
Member Since: Aug 2005
Location: Hudson WI
Posts: 13,598
Received 181 Likes
on
162 Posts
NCM Sinkhole Donor
http://www.jegs.com/i/Gates/465/3293...FQQbaQodqmAL7A
The following users liked this post:
MDSilverVette (03-31-2016)
03-31-2016, 03:57 PM
#17
Le Mans Master
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
Instead of metal clamps, try these, I think you will like them.
http://www.jegs.com/i/Gates/465/3293...FQQbaQodqmAL7A
http://www.jegs.com/i/Gates/465/3293...FQQbaQodqmAL7A
03-31-2016, 04:12 PM
#18
Race Director
Member Since: Aug 2005
Location: Hudson WI
Posts: 13,598
Received 181 Likes
on
162 Posts
NCM Sinkhole Donor
I put them on other cars. I have black silicone hoses in my garage, just haven't had time to install.
Zoro industrial has the best price, about the same as metal clamps.
https://www.zoro.com/gates-shrink-clamps/g/00231605/
Zoro industrial has the best price, about the same as metal clamps.
https://www.zoro.com/gates-shrink-clamps/g/00231605/
Last edited by timd38; 03-31-2016 at 04:15 PM.
The following users liked this post:
NemesisC5 (03-31-2016)
04-02-2016, 07:01 PM
#19
Racer
That looks great! I want to do the same thing to my 05. What valve covers are those? Where did you find the red coil packs?
04-02-2016, 07:03 PM
#20
Racer
Thread Starter
The valve covers are made by proform and the coils are oem - I just painted them with caliper paint.
Here is my post with the part numbers from when I did it. Post #19
https://www.corvetteforum.com/forums...-splitter.html
Last edited by MDSilverVette; 04-02-2016 at 07:06 PM.