what is the difference in the c5 and c6 torque tube for a manual
09-15-2014, 11:23 PM
#1
Racer
Thread Starter
what is the difference in the c5 and c6 torque tube for a manual
I have an 07 c6 torque tube for a six speed. A t56
Last night I put my c5 input shaft in it and it slid right in. So is this the same torque tube for the c5 T56? It measured 58" so I am asking you experts what is the difference between the two. I rebuilt the one in my C5 Z06 and I know about the 10MM and the 12MM I put the RPM couplers in it and new bearings.
Will this 07 C6 T56 torque tube work with the C5. I have 2 cars tore down and really dont want to drop my center plate to measure my C5 torque tube. Thanks for the help.
Last night I put my c5 input shaft in it and it slid right in. So is this the same torque tube for the c5 T56? It measured 58" so I am asking you experts what is the difference between the two. I rebuilt the one in my C5 Z06 and I know about the 10MM and the 12MM I put the RPM couplers in it and new bearings.
Will this 07 C6 T56 torque tube work with the C5. I have 2 cars tore down and really dont want to drop my center plate to measure my C5 torque tube. Thanks for the help.
09-16-2014, 01:52 PM
#2
Supporting Vendor
Member Since: Apr 2011
Location: Frederick Maryland
Posts: 3,179
Likes: 0
Received 147 Likes
on
111 Posts
St. Jude Donor '08-'09-'10-'11-'12, '14-'15-'16-'17-'18
I have an 07 c6 torque tube for a six speed. A t56
Last night I put my c5 input shaft in it and it slid right in. So is this the same torque tube for the c5 T56? It measured 58" so I am asking you experts what is the difference between the two. I rebuilt the one in my C5 Z06 and I know about the 10MM and the 12MM I put the RPM couplers in it and new bearings.
Will this 07 C6 T56 torque tube work with the C5. I have 2 cars tore down and really dont want to drop my center plate to measure my C5 torque tube. Thanks for the help.
Last night I put my c5 input shaft in it and it slid right in. So is this the same torque tube for the c5 T56? It measured 58" so I am asking you experts what is the difference between the two. I rebuilt the one in my C5 Z06 and I know about the 10MM and the 12MM I put the RPM couplers in it and new bearings.
Will this 07 C6 T56 torque tube work with the C5. I have 2 cars tore down and really dont want to drop my center plate to measure my C5 torque tube. Thanks for the help.
__________________
09-16-2014, 10:14 PM
#3
Racer
Thread Starter
Thank you for the info you are awesome! This is going to be used in a street rod so the 1 -5/8 don't matter!
That's good news for me. Thank you again Rick!
That's good news for me. Thank you again Rick!