Race Proven Motorsports C7 Results!!
#1
Le Mans Master
Thread Starter
#3
Le Mans Master
Thread Starter
Added our next round of mods. We installed a Nitrous outlet plate system. Other than that the car is bone stock. Here is the dyno graph on a 50 and 100 shot. This is with only around 700psi Bottle pressure too. We just wanted to see how the LT1 motor liked it... and it LOVED it... Look at that torque!!!!... I did a motor pull also with 3 degrees of timing taken out of the factory tune.
This run is on the 100 shot still with low pressure in the bottle. Stock tires and everything else bone stock
We will have new times in a couple days.
This run is on the 100 shot still with low pressure in the bottle. Stock tires and everything else bone stock
We will have new times in a couple days.
#4
430WHP and this thing is advertised at 450 to the flywheel? Obviously, somebody is being "disingenuous". With a sub 12 time slip, and 119mph, I think GM may be downplaying this motor. I did read the torque curve is similar to that of the Z06...that would explain the track numbers.
Either way, GM has definitely upped the bar one or two more notches. Congrats!
Ric
Either way, GM has definitely upped the bar one or two more notches. Congrats!
Ric