Don't wait till you scrape! Check this out!
05-28-2014, 07:03 PM
#41
Supporting Vendor
Thread Starter
Hi kfede1,
First off, thank you for your business.
I'm am sorry you are disappointed.
We always like customer feed back good or bad to help us improve our products.
How many pull ties did you get in your kit?
Can you post a picture of how they are to short? We have not seen or heard
anything about that out of over 1000 sold.
Did you follow the instructional video that shows how much glue to use and explains that it expands? Here is the link. http://hstrial-saccitycorvette.homes...ion-Video.html
When we first started selling the C6 glue on Fangs a couple customers let us know that the kit could use more sand paper. So we add more and did hear anything else.
When did you get your Fangs?
Thank you for your input.
Christian
First off, thank you for your business.
I'm am sorry you are disappointed.
We always like customer feed back good or bad to help us improve our products.
How many pull ties did you get in your kit?
Can you post a picture of how they are to short? We have not seen or heard
anything about that out of over 1000 sold.
Did you follow the instructional video that shows how much glue to use and explains that it expands? Here is the link. http://hstrial-saccitycorvette.homes...ion-Video.html
When we first started selling the C6 glue on Fangs a couple customers let us know that the kit could use more sand paper. So we add more and did hear anything else.
When did you get your Fangs?
Thank you for your input.
Christian
05-30-2014, 04:32 PM
#42
Instructor
Hi kfede1,
First off, thank you for your business.
I'm am sorry you are disappointed.
We always like customer feed back good or bad to help us improve our products.
How many pull ties did you get in your kit?
Can you post a picture of how they are to short? We have not seen or heard
anything about that out of over 1000 sold.
Did you follow the instructional video that shows how much glue to use and explains that it expands? Here is the link. http://hstrial-saccitycorvette.homes...ion-Video.html
When we first started selling the C6 glue on Fangs a couple customers let us know that the kit could use more sand paper. So we add more and did hear anything else.
When did you get your Fangs?
Thank you for your input.
Christian
First off, thank you for your business.
I'm am sorry you are disappointed.
We always like customer feed back good or bad to help us improve our products.
How many pull ties did you get in your kit?
Can you post a picture of how they are to short? We have not seen or heard
anything about that out of over 1000 sold.
Did you follow the instructional video that shows how much glue to use and explains that it expands? Here is the link. http://hstrial-saccitycorvette.homes...ion-Video.html
When we first started selling the C6 glue on Fangs a couple customers let us know that the kit could use more sand paper. So we add more and did hear anything else.
When did you get your Fangs?
Thank you for your input.
Christian
Picture will have to wait for a bit, I am not going to put in on the lift for a while.
Installed with video playing on my phone. The reason I thought I was short was that I put less on than described in the video and ran out.
I don't need more sand paper, just a piece that was big enough to get a good hold on.
Got the kit directly from you guys.
05-30-2014, 05:00 PM
#43
Race Director
I thought the same thing about the glue. There's not enough to cover everywhere the instructions say to cover but I guess it doesn't matter since they won't fall off using what's there.
06-09-2014, 07:59 PM
#45
Supporting Vendor
Thread Starter
Hi Mark,
Nothing at this time unless its a group buy.
Thank you!
Christian
Nothing at this time unless its a group buy.
Thank you!
Christian
06-16-2014, 02:43 PM
#47
Supporting Vendor
Thread Starter
Received 0 pull ties.
Picture will have to wait for a bit, I am not going to put in on the lift for a while.
Installed with video playing on my phone. The reason I thought I was short was that I put less on than described in the video and ran out.
I don't need more sand paper, just a piece that was big enough to get a good hold on.
Got the kit directly from you guys.
Picture will have to wait for a bit, I am not going to put in on the lift for a while.
Installed with video playing on my phone. The reason I thought I was short was that I put less on than described in the video and ran out.
I don't need more sand paper, just a piece that was big enough to get a good hold on.
Got the kit directly from you guys.
Sorry you didn't receive the quick ties. Some how it must have gotten over looked when the kit was put together. We would have ship them right out to you if you would have let us know.
I'm not sure about the glue, we haven't had any complaints about there not being enough. It the same amount we glued ours on with. We will look more into it though. We appreciate your input on our products so we can improve on them.
Thank you,
Christian
06-16-2014, 02:50 PM
#48
Supporting Vendor
Thread Starter
Christian
06-16-2014, 02:51 PM
#49
Supporting Vendor
Thread Starter
07-11-2014, 02:03 PM
#51
Supporting Vendor
Thread Starter
08-05-2014, 01:17 PM
#52
Supporting Vendor
Thread Starter
The C6 lower radiator support is aluminum so its especially fragile.
11-06-2014, 12:47 PM
#53
Supporting Vendor
Thread Starter
Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6 Corvette.
02-09-2015, 07:27 PM
#55
Supporting Vendor
Thread Starter
02-20-2015, 09:18 PM
#58
Supporting Vendor
Thread Starter
08-25-2015, 12:30 PM
#59
Supporting Vendor
Thread Starter
We have Fangs, Alignit Tools,Big 3, Coolits,Optisparks Please check our Website http://www.saccitycorvette.com/index.html
