**C6 with 408ci makes 582rwhp by Late Model Racecraft**
#1
Supporting Vendor
Thread Starter
**C6 with 408ci makes 582rwhp by Late Model Racecraft**
Just finished up this fine 05 corvette with a complete Z06 fender conversoin and 408ci solid roller engine with cathedral port LS6 cylinder heads. Enjoy!
http://www.youtube.com/watch?v=fsEbM...ature=youtu.be
http://www.youtube.com/watch?v=fsEbM...ature=youtu.be
__________________
Worlds Quickest C8 Corvette 8.83@160MPH
FIRST C7 Corvette in the 7's & 9's
FIRST C7 Corvette in the 7's & 9's
2019 ZR1 LT5 8.874 @ 155
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
#3
Supporting Vendor
Thread Starter
Its not like the ole days where the valves would have to be checked after every 1/4 mile run. Setup like this I recommend the customer to come back after 3-5k miles just to check them, but I will bet they will be just fine.
#4
_Sloth Whisperer_
Member Since: Jul 2008
Location: Malaysia Air Flight 370
Posts: 3,372
Likes: 0
Received 9 Likes
on
6 Posts
Man, that's healthy. Not to pry, as you're probably a bit proprietary with the cam specs, but what sort of ballpark duration and lift are we looking at with that solid roller? I'm just asking for comparison's sake so I can get a feel for how extreme they get.