You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
Diablosport & Halltech or Vararam CAI Package - 2008 C6 Corvette LS3/LS7
You guys asked for this package so here it is
Standard you get a DiabloSport Predator U7194 Predator (which now has 08 support) along with a Halltech Killer Bee AAIS - 2008 Chevy Corvette LS3 (Black)
just ordered the MS combo Predator/Halltech (black)/Beehive/interface for my 2008 Corvette A6 full report soon.
two questions do i need the 160 degree thermostat with this combo and i currently have the Vette Air scoop installed will i still be able to use the VA with the Beehive?
thanks bosco
just ordered the MS combo Predator/Halltech (black)/Beehive/interface for my 2008 Corvette A6 full report soon.
two questions do i need the 160 degree thermostat with this combo and i currently have the Vette Air scoop installed will i still be able to use the VA with the Beehive?
thanks bosco
disregard the question about the Vett-Air and Beehive i went to their web site and it answered my question. the Beehive will work with the Vette-Air. they sell both
Sorry about the wait... we weren't on the forum much over the weekend and we came back to a very busy day yesterday. Just saw your post and no you do not NEED the 160 degree thermostat for anything, but we recommend the thermostat regardless of other mods. These LSx motors can get heat soaked pretty badly and anything that can be done to keep the coolant/engine/engine bay temps down should be done in our opinion.
If you get the thermostat in the future you'll want to use your Predator to lower the temps that your cooling fans kick on to get full benefit from the new thermostat. Hope that answers your question. Thanks!!
Sorry about the wait... we weren't on the forum much over the weekend and we came back to a very busy day yesterday. Just saw your post and no you do not NEED the 160 degree thermostat for anything, but we recommend the thermostat regardless of other mods. These LSx motors can get heat soaked pretty badly and anything that can be done to keep the coolant/engine/engine bay temps down should be done in our opinion.
If you get the thermostat in the future you'll want to use your Predator to lower the temps that your cooling fans kick on to get full benefit from the new thermostat. Hope that answers your question. Thanks!!
thanks i'll install one soon.
btw received the Halltech/Beehive part of my order today and it was missing the hood seal pm'd MS and shortly thereafter Branden replied he would look into it a couple of hours later i get a call on my cell from Jim Hall the owner of Halltech he said he would send one soon. tomorrow the Predator is to be delivered so far so good. thanks to Maryland Speed for all your help.
btw received the Halltech/Beehive part of my order today and it was missing the hood seal pm'd MS and shortly thereafter Branden replied he would look into it a couple of hours later i get a call on my cell from Jim Hall the owner of Halltech he said he would send one soon. tomorrow the Predator is to be delivered so far so good. thanks to Maryland Speed for all your help.
No problem at all Let us know how you like the Halltech and Predator combo once you get everything!
Quote:
Originally Posted by headhunter1975
Is there any reason why the Halltech Venom for the 2005 isn't offered? Or is the Vararam a better intake?
No specific reason other than it being difficult to offer a package for every intake available together with the Predator. Sometimes we stick to offering what we think will be the more popular choices, but give us a call and we can do something for you on the two items that you're looking at. 443-730-9428
Let us know how you like the Halltech and Predator combo once you get everything!
update: received the hood seal, well done. i had some problems with the Predator install because of my poor computer skillz that ended up being my fault (needed update) but after a couple of e-mails and a phone call from Branden i got it going. then to add to my day i only got to drive it for a couple of miles before the rain came. car seems fine idles well and drives like stock. Maryland Speed gets the bosco seal of approval for cost, speed of delivery and customer service will use them again when the time comes. thank you
update: received the hood seal, well done. i had some problems with the Predator install because of my poor computer skillz that ended up being my fault (needed update) but after a couple of e-mails and a phone call from Branden i got it going. then to add to my day i only got to drive it for a couple of miles before the rain came. car seems fine idles well and drives like stock. Maryland Speed gets the bosco seal of approval for cost, speed of delivery and customer service will use them again when the time comes. thank you
Branden is talking me into headers.
Thanks for the kind feedback! Glad everything came together in a timely manner for you. I replied to your other post in our Vararak/Kooks thread just a few minutes ago. Give us a call about those headers today when you get a chance
Two of the biggest-gain intakes being offered here with a Diablosport programmer! It's a great package, and a great price. Call us with any questions! 443-730-9428
Corvette Store
Diablosport & Halltech or Vararam CAI Package - 2008 C6 Corvette LS3/LS7
pm'd MS and shortly thereafter Branden replied he would look into it a couple of hours later i get a call on my cell from Jim Hall the owner of Halltech he said he would send one soon. tomorrow the Predator is to be delivered so far so good. thanks to Maryland Speed for all your help.
Let us know how you like the Halltech and Predator combo once you get everything!
