HP Tuners VCM Suite v2.1.16 is Now Available!
#1
Former Vendor
Thread Starter
Member Since: Dec 2004
Location: Trenton NJ
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
HP Tuners VCM Suite v2.1.16 is Now Available!
HP Tuners VCM Suite v2.1.16 is Now Available!
The first general release for 2007 and VCM Suite just keeps getting better. This release brings some new pricing announcements, combined ECM and TCM scanning and TCM controls (bidirectional) for GenIV and Duramax vehicles fitted with TCM's and almost 200 new parameters for GenIV (and some 4cyl) vehicles fitted with later style ECM's. The release and business plans are packed for 2007 - this is just the beginning!
Below are the major new features in v2.1.16:
- lowered credits for various GenIII and GenIV vehicles, new GenIV unlimited group
- combined ECM and TCM scanning
- almost 200 new parameters for GenIV (and some 4 cyl) including: DoD, Injector timing, Knock Sensor, Transient Fuel, Ignition OFF Fans and much more.
- axis editing available for selected tables, vehicle dependant
- GenIV traction control patch (MAF fail fixup as included in 2bar) now free
- support for additional 2007 vehicles and new operating systems
Once again, we would like to thank our dedicated team of forum moderators, beta testers and all our valued customers who assist and provide idea's to make VCM Suite the best tuning solution on the market.
Lowered Credits and NEW GenIV unlimited group
VCM Suite 2.1.16 reduces the single vehicle credits for selected GenIV vehicles and also introduces two new GenIV unlimited vehicle groups. In most cases the single vehicle credits are now 2 credits and the new unlimited groups are 130 credits.
See our Vehicle List for full details.
You MUST download and install VCM Suite 2.1.16 to take advantage of the new credit requirements!!
Also, any previously licensed vehicles or year/models will still retain the original credits required to license them and count towards the next available upgrade as per the upgrade credit system.
Combined ECM and TCM Scanning
VCM Scanner now includes the ability to scan TCM parameters while scanning the ECM at the same time. Nothing special needs to be done, just select any desired TCM PIDs from the insert PID menu and start scanning. TCM controls are also available for vehicles fitted with supported TCM's.
Table Axis Editing
In this release selected tables for later vehicles allow axis editing, for example, the RPM axis on the main spark tables for the GenIV vehicles. If the axis is supported for editing, VCM Editor now allows you to modify that axis to suit your application. Whenever, you see an axis label that is underlined, simply click the label and the edit axis window will appear.
A complete list of new features and bug fixes can be found HERE
Obtaining the update
All customers can login to download and install VCM Suite 2.1.16. Updates are FREE to all customers. MPVI customers who have never logged in, please create an account.
Please note that not all listed features and new vehicle types are available on serial interfaces.
For all ordering and pricing information on any of the new vehicles listed above, please see our Shop Online and Supported Vehicles page.
Check out the Demo of the new features Here
- The HP Tuners team.
The first general release for 2007 and VCM Suite just keeps getting better. This release brings some new pricing announcements, combined ECM and TCM scanning and TCM controls (bidirectional) for GenIV and Duramax vehicles fitted with TCM's and almost 200 new parameters for GenIV (and some 4cyl) vehicles fitted with later style ECM's. The release and business plans are packed for 2007 - this is just the beginning!
Below are the major new features in v2.1.16:
- lowered credits for various GenIII and GenIV vehicles, new GenIV unlimited group
- combined ECM and TCM scanning
- almost 200 new parameters for GenIV (and some 4 cyl) including: DoD, Injector timing, Knock Sensor, Transient Fuel, Ignition OFF Fans and much more.
- axis editing available for selected tables, vehicle dependant
- GenIV traction control patch (MAF fail fixup as included in 2bar) now free
- support for additional 2007 vehicles and new operating systems
Once again, we would like to thank our dedicated team of forum moderators, beta testers and all our valued customers who assist and provide idea's to make VCM Suite the best tuning solution on the market.
Lowered Credits and NEW GenIV unlimited group
VCM Suite 2.1.16 reduces the single vehicle credits for selected GenIV vehicles and also introduces two new GenIV unlimited vehicle groups. In most cases the single vehicle credits are now 2 credits and the new unlimited groups are 130 credits.
See our Vehicle List for full details.
You MUST download and install VCM Suite 2.1.16 to take advantage of the new credit requirements!!
Also, any previously licensed vehicles or year/models will still retain the original credits required to license them and count towards the next available upgrade as per the upgrade credit system.
Combined ECM and TCM Scanning
VCM Scanner now includes the ability to scan TCM parameters while scanning the ECM at the same time. Nothing special needs to be done, just select any desired TCM PIDs from the insert PID menu and start scanning. TCM controls are also available for vehicles fitted with supported TCM's.
Table Axis Editing
In this release selected tables for later vehicles allow axis editing, for example, the RPM axis on the main spark tables for the GenIV vehicles. If the axis is supported for editing, VCM Editor now allows you to modify that axis to suit your application. Whenever, you see an axis label that is underlined, simply click the label and the edit axis window will appear.
A complete list of new features and bug fixes can be found HERE
Obtaining the update
All customers can login to download and install VCM Suite 2.1.16. Updates are FREE to all customers. MPVI customers who have never logged in, please create an account.
Please note that not all listed features and new vehicle types are available on serial interfaces.
For all ordering and pricing information on any of the new vehicles listed above, please see our Shop Online and Supported Vehicles page.
Check out the Demo of the new features Here
- The HP Tuners team.
#3
Former Vendor
Thread Starter
Member Since: Dec 2004
Location: Trenton NJ
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
the A6 tranny parameters have been available since October 2006
Not all of the tranny TM parameters have been added...there are currently about a half dozen of them available.
Not all of the tranny TM parameters have been added...there are currently about a half dozen of them available.
#6
Le Mans Master
Thanks for posting the information (did not read the email duh)
#7
Team Owner
#8
Tech Contributor
The best news in this release is the price for our cars is cut in half! From $200 to $100. Once you get it your buddies will want a tune and now it costs less to add them to your cord.
And for those the drag race, the scanner feature is great. Having the graphs of your runs is invaluable. You can see exactly what you did correctly and what you did wrong. Not to mention being able to change spark and fueling based on current weather conditions.
This is a great deal for excellent software.
And for those the drag race, the scanner feature is great. Having the graphs of your runs is invaluable. You can see exactly what you did correctly and what you did wrong. Not to mention being able to change spark and fueling based on current weather conditions.
This is a great deal for excellent software.
#9
Burning Brakes
Axis table editing.......awsome! I've been messing with the axis editing feature since I downloaded it. I wish the Y axis in the spark graphs would have been enabled for this. Oh well, maybe next time.
dougie
dougie