Stoptech big brake kit
#2
Team Owner
Thread Starter
Member Since: Jan 2004
Location: Boston MA
Posts: 38,578
Received 597 Likes
on
177 Posts
St. Jude Donor '06-'07-'08 & '12-'13
Originally Posted by MarineC6
I'm not running them yet but will soon on my C6. I am doing front and rear. I've learned that 17mm wheel spacers and longer wheel studs are needed for the calipers to clear the (stock) spokes. I experimented with wheel spacers to see if it'd be obvious and it was to me. The other option is aftermarket wheels that have enough clearance. So far there are only 2 wheels I personally would consider: HRE's Competition or the ZO7 replica.
I think i will only need up to 3mm spacers
Is the front rear kit worth it or is the front kit enough?
#3
Melting Slicks
Originally Posted by burtonbl103
I already have the wheels 19 20 setup
I think i will only need up to 3mm spacers
Is the front rear kit worth it or is the front kit enough?
I think i will only need up to 3mm spacers
Is the front rear kit worth it or is the front kit enough?
#4
Team Owner
Thread Starter
Member Since: Jan 2004
Location: Boston MA
Posts: 38,578
Received 597 Likes
on
177 Posts
St. Jude Donor '06-'07-'08 & '12-'13
Originally Posted by RichieRich
DUDE, WOULD YOU PUT THOSE DAMN THINGS ON YOUR CAR ALREADY!!! I'M TIRED OF LOOKING AT THEM TIRE-LESS SITTING IN THAT ROOM!!!
Should have mounted by the end of week
BUt i wont have my car untill end of april
AM i nuckin futs or what !
#5
Burning Brakes
Originally Posted by burtonbl103
Has anyone used a stoptech big break kit on there c5 or c6
I have been looking at this
I have been looking at this
Not on a Corvette, on an M3. They are quite impressive and the Axxis Ultimate pads used are very good on the street and track.
Here's a "test" done on a 350Z:
http://www.zeckhausen.com/testing_brakes.htm
They sell the kit, so keep that in mind.
#6
Team Owner
Thread Starter
Member Since: Jan 2004
Location: Boston MA
Posts: 38,578
Received 597 Likes
on
177 Posts
St. Jude Donor '06-'07-'08 & '12-'13
Originally Posted by MarineC6
19/20's.. WOW! Nice looking wheels! Did you get your wheels from Daemon Motorsports?
Alex is great
Anyone looking for wheels give him a ring.
He knows what he is taking about !
#7
Originally Posted by burtonbl103
YES i did
Alex is great
Anyone looking for wheels give him a ring.
He knows what he is taking about !
Alex is great
Anyone looking for wheels give him a ring.
He knows what he is taking about !
I sell Stoptech BBK's as well.. best prices guaranteed
#9
Originally Posted by Powerhungry
Alex, do you have any pics of those Champion's mounted on a C6? If not, mounted on another car?
These 2 pics are the 18x18 setup.. Bill has the first 19x20 setup
#10
Premium Supporting Vendor
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Originally Posted by burtonbl103
Has anyone used a stoptech big break kit on there c5 or c6
I have been looking at this
I have been looking at this
We use them on our World Challenge race car. We are also a dealer for them.
As posted, you will need wheels with extra brake clearance.
GIve us a call and we can get a set for you asap.
We are heading to race in St pete Florida next weekend. if you are from the area , stop in and see us.
Thanks
Lou G