08 C6 Guy

Alright everybody - time for me to get rid of the extra things I do not need to finish my build. I have been rebuilding my 08 C6 and had purchased a Z06 shell to pull parts from. A lot of the really good stuff like the body and brakes were pulled already - but plenty of other things remain, as well as stock parts that were pulled for upgraded parts. Feel free to make offers on items, pricing is based on some basic research and are not super firm. I have lots of random items left from the Z so feel free to message me if you need things like carpets, radio/speakers, other random items. Im only listing the major items.

LS2 6.0 Longblock Heads to oil pan - freshly checked over - 700 miles out of a '07 TBSS - was going to use this for my build till i picked up a 6.2 block. $3500

T56 Trans out of a '07 Z06 - ~40k miles - $1100

6L80 auto out of my '08 C6 Z51 - 400 miles since it was rebuilt under warranty by GM so fresh clutch packs and seals - have paperwork - $1000

Rear Diff out of my '08 C6 Z51 - Z51 gearing w/ 16k miles - $500

6speed '07 Z Torque Tube w/ shaft $900

'08 C6 Z51 Brake Calipers and Rotors - front and rear - 16k miles - $600

LS3 Vararam - Painted - $250

LS3 Stock Air Intake - $50

(2) C6 Engine Cradles - $400 each

Rear Hatch of '07 Z - Yellow - $750

'07 Z Hood with 427 Badges - Yellow - $450

'07 Z Dry Sump tank and hoses - $1000

Driver Rear Base C6 Quarter Panel - Black - $300

LS3 stock full exhaust (~500 miles had been removed almost immediately after buying the car new) - Manifolds/cats/x/mufflers - $450

Stock LS2 Intake Manifold - $200

LS3 Fuel Rail Covers - Painted but heavily scratched up - will need to be refinished - $100

Acrylic Black out tail light covers - set of 4 - $75

ALL ITEMS ARE PLUS SHIPPING - I will not entertain shipping on the bigger items like the motor or hood or hatch at first until I see if any locals are interested for pickup. Items are located in the Northwest Suburbs of Chicago. Message me if you're interested.

Will entertain certain offers for trades to help me along with building my C6 back up - need a meth injection kit and a supercharger kit for an LS3. Prefer A&A or ECS centri blower kits. Also looking for a good coilover kit - prefer LG. NPP in a box

If anyone wants a reference for good online business - my eBay user is GlobalBeerSolutions 210 feedback transactions all 100% positive - Thanks everyone, have a great day.

08 C6 Guy

Common everyone - make offers!

c5racr1

What's the deal with that t56? Good or needs rebuild?

08 C6 Guy

As far as I know it is good to go, vehicle had a front end collision and was purchased at auction.

Walker_ID

interested in tranny but you're inbox is full

cdelgado14

do you have a driver side visor?

Norman Lane

Your p.m box is full, I'm trying to contact you.

08 C6 Guy

Sorry everyone, PM box cleared out. Have been looking at it all on my phone and it doesn't give you the inbox limits on the mobile site.

08 C6 Guy

I will check thru my boxes, I believe I might. Let me get back to you.

Curby

I am looking for an LS2 intake, rails, throttlebody, and MAF for my LS1 build.

Does your intake have the rails and throttlebody?

Curby

I am also looking for a right front Z06 brake caliper. I am not sure if the front calipers are different from left to right on the Z06.

08 C6 Guy

May be able to get the rails from a buddy of mine depending on what you are offering for everything. The Z06 calipers and widebody was repurposed for my car, and is why I'm selling my Z51 set

08 C6 Guy

To clarify people didn't think about it based on the '08 6L80 and diff, the diff is out of a Z51 A6 car, not M6.

08 C6 Guy

Bump

TACP4LIFE

T56 still for sale? Willing to ship?

08 C6 Guy

Where are you located? - I will consider shipping if it goes too much farther without interest from locals.

TACP4LIFE

North Carolina, zip 28376

z32_aaron

Whats that crank pulley from?