Fully built 6l80 trans 1000rwhp 0 miles
06-25-2014, 12:35 PM
#1
Pro
Thread Starter
Member Since: Dec 2010
Location: Davie Florida
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Up for sale is an ATF fully built 6L80 that will handle 1000rwhp. It is freshly done, 0 miles, for $4000 + shipping and Paypal OBO. To build the tranny cost me $4500 alone so you'd be getting a new fully built trans plus be able to sell your trans, so in other words no core charge. Unit was professionally installed and will be removed by Horsepower sales of Florida. Please don't hesitate to ask any questions and you can also call Jeremy at HP Sales or Jason at ATF to confirm and ask questions. Trans is being redone only because I don't want to sell technically a used trans. So it will have all new clutch packs and seals. I spoke to Jason, the owner of ATF, and he is fully standing behind this transmission and will continue to fully warranty the transmission and tune it specifically for your car and mods. So here's an opportunity to get a fully built transmission with a warranty and custom tuned for your application from one of the best companies in the business. Only reason I'm taking the trans out is because I got a deal on all the parts to switch over to manual that I could not pass up and I'm going to start road racing. I will also have an 07 auto TQ tube and rear end 2:56 gearing, auto shifter and brake pedal assembly. If you have any questions please feel free to ask.
Last edited by Proracing; 07-30-2014 at 12:27 AM.
06-25-2014, 01:01 PM
#3
Pro
Thread Starter
Member Since: Dec 2010
Location: Davie Florida
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Automatic Transmission Factory in Florida. They've been doing them for a while now they just don't really advertise it. They are top notch, stand by there work and know what there doing. They are the only company that puts a gauge directly to the trans to make sure all the shift pressures are correct.
06-25-2014, 01:53 PM
#6
Pro
Thread Starter
Member Since: Dec 2010
Location: Davie Florida
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Here is a break down of what is done.
Complete rebuild with all new gaskets, seals, rings & filter. New pistons & retainers where needed.
Alto 6L80 PowerPacks® in the 4/5/6 , 3/5/Rev & 2-6 clutch packs.
Raybestos or B&W h/d frictions in the low/rev clutch pack & 1/2/3/4 pack.
300m Billet Intermediate Shaft (output carrier shaft-4/5/6 hub) with improved thrust bearing.
Wide inlet filter
ATF valve body ugrades.
Performance Transmission Tuned with HP Tuners software.
Complete rebuild with all new gaskets, seals, rings & filter. New pistons & retainers where needed.
Alto 6L80 PowerPacks® in the 4/5/6 , 3/5/Rev & 2-6 clutch packs.
Raybestos or B&W h/d frictions in the low/rev clutch pack & 1/2/3/4 pack.
300m Billet Intermediate Shaft (output carrier shaft-4/5/6 hub) with improved thrust bearing.
Wide inlet filter
ATF valve body ugrades.
Performance Transmission Tuned with HP Tuners software.
06-25-2014, 09:03 PM
#8
Racer
Who's doing the trans tuning on the 6L80? People usually don't build them for high horsepower because very few can tune it correctly. If you can't tune it right it doesn't matter what parts are in it.
Depending on tuner, I may be interested.
Depending on tuner, I may be interested.
