FS: LME built Iron block 402 - Texas
03-04-2014, 07:21 PM
#1
7th Gear
Thread Starter
Member Since: Feb 2014
Location: Lake Jackson Texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
FS: LME built Iron block 402 - Texas
Didn't know where else to post this so here goes. I have for sale a brand new, never run LME built iron block 402.
-Brand new 6.0L Block
-Callies CompStar Crank
-Callies CompStar Rods
-Wiseco -8cc Pistons
-Custom 247/263 .624/.632 113+6 nitrous cam
-Morel Lifters
-LS2 Timing Chain
-PRC 237cc CNC'd heads with 62cc chambers
-.675 Lift EHT Springs
- Powdered Metal Valve Guides
-ARP main studs, rod bolts and head bolts
-LME Billet 24x Reluctor Wheel
I have the build sheet I can provide to anyone interested.
This motor was built with nitrous in mind. I was planning to use a 250-300 shot.
Asking $7200 picked up. PM me for contact info. Located in Lake Jackson, Texas. I will meet/deliver within a reasonable distance around the Houston Area
For those of you that are interested, I will sell separate. $5200 for the shortblock with cam and lifters. $2200 for the heads and ARP head bolts
I will also throw in the stock rockers with Comp Trunion Upgrade. I also have coils, valve covers, timing cover, rear cover, f-body oil pan, and f-body Powerbond 25% underdrive balancer I can throw in for a extra if needed. The motor is currently on an engine stand in my garage, coated in motor oil and wrapped in a large plastic trash bag.
I don't have to sell this, just decided to move on to a c6. Price is negotiable but DO NOT lowball me. I know what I have into it and I know what it would cost to build again.
I'm sure I am forgetting something. If you have any questions, just ask.
Why wait to have an engine built! Buy this one already assembled!
-Brand new 6.0L Block
-Callies CompStar Crank
-Callies CompStar Rods
-Wiseco -8cc Pistons
-Custom 247/263 .624/.632 113+6 nitrous cam
-Morel Lifters
-LS2 Timing Chain
-PRC 237cc CNC'd heads with 62cc chambers
-.675 Lift EHT Springs
- Powdered Metal Valve Guides
-ARP main studs, rod bolts and head bolts
-LME Billet 24x Reluctor Wheel
I have the build sheet I can provide to anyone interested.
This motor was built with nitrous in mind. I was planning to use a 250-300 shot.
Asking $7200 picked up. PM me for contact info. Located in Lake Jackson, Texas. I will meet/deliver within a reasonable distance around the Houston Area
For those of you that are interested, I will sell separate. $5200 for the shortblock with cam and lifters. $2200 for the heads and ARP head bolts
I will also throw in the stock rockers with Comp Trunion Upgrade. I also have coils, valve covers, timing cover, rear cover, f-body oil pan, and f-body Powerbond 25% underdrive balancer I can throw in for a extra if needed. The motor is currently on an engine stand in my garage, coated in motor oil and wrapped in a large plastic trash bag.
I don't have to sell this, just decided to move on to a c6. Price is negotiable but DO NOT lowball me. I know what I have into it and I know what it would cost to build again.
I'm sure I am forgetting something. If you have any questions, just ask.
Why wait to have an engine built! Buy this one already assembled!
Last edited by BoostJunkieXL; 03-08-2014 at 11:33 PM.
