FS: Whipple 2.9 kit **CHEAP**
#1
Pro
Thread Starter
FS: Whipple 2.9 kit **CHEAP**
Virtually new Black Whipple 2.9 kit for C6 Z06. Or any C6 that has LS7 heads installed.
I have gone through the entire installation book and confirmed I have all parts. I also bagged and tagged virtually everything, so it would be a walk in he park to install.
This blower has less than 100 miles on it. My engine builder installed my cam bearings out of alignment with the oil holes, and it ultimately caused me to have to pull it. I decided to go NA instead.
What you get:
Complete Whipple 2.9 kit
Whipple 8 pulley kit
FAST 65lb injectors
What you don't get:
Whipple hood from RK Sport ($600.00)
Boost-a-pump (used 175+/-)
I had to modify one of the pulley brackets to fit in my tall deck block. It does not affect the function, and can't really be seen while it's on the car. BUT... If you insist on having an unmodified bracket Whipple sell hem for $250.00.
Lastly, there are a couple scratches on one of the fuel rails. It is not visible at all while installed. It is under the part of the blower. You can only see the scratch when the fuel rail is off he car.
**Note** The cold air intake in the picture isn't included. It doesn't even go with this system as its for an LS2. It was accidentally put in the picture.
There is absolutely nothing wrong with this system. I am selling it cheap because I need to order some new parts for my build, and I promised the wife I wouldn't charge it.
Lastly, I have to drive to MI to pick up my new motor in the next few weeks. I can deliver it anywhere between ND and Dearborn, MI.
$ 3,900 shipped! (PayPal accepted) It's boxed and ready to ship
I have gone through the entire installation book and confirmed I have all parts. I also bagged and tagged virtually everything, so it would be a walk in he park to install.
This blower has less than 100 miles on it. My engine builder installed my cam bearings out of alignment with the oil holes, and it ultimately caused me to have to pull it. I decided to go NA instead.
What you get:
Complete Whipple 2.9 kit
Whipple 8 pulley kit
FAST 65lb injectors
What you don't get:
Whipple hood from RK Sport ($600.00)
Boost-a-pump (used 175+/-)
I had to modify one of the pulley brackets to fit in my tall deck block. It does not affect the function, and can't really be seen while it's on the car. BUT... If you insist on having an unmodified bracket Whipple sell hem for $250.00.
Lastly, there are a couple scratches on one of the fuel rails. It is not visible at all while installed. It is under the part of the blower. You can only see the scratch when the fuel rail is off he car.
**Note** The cold air intake in the picture isn't included. It doesn't even go with this system as its for an LS2. It was accidentally put in the picture.
There is absolutely nothing wrong with this system. I am selling it cheap because I need to order some new parts for my build, and I promised the wife I wouldn't charge it.
Lastly, I have to drive to MI to pick up my new motor in the next few weeks. I can deliver it anywhere between ND and Dearborn, MI.
$ 3,900 shipped! (PayPal accepted) It's boxed and ready to ship
Last edited by C6smackdown; 06-15-2016 at 08:26 PM. Reason: Corrected the description after speaking to Whipple
#4
Pro
Thread Starter
#5
Melting Slicks
Damn this is great price, that would look bad *ss in my LS2 '55 Ford truck. Sorry it won't work, glws. L8R ZFLASH
#9
Pro
Thread Starter
Yes, it's intercooled. In the pictures you will see something that looks like a radiator, a tank, and a few lines. That is the heat exchanger assembly. It is 102mm , but they make an adapter that allows a stock TB.
#12
#14
Pro
Thread Starter
I forgot to mention that it also needs the crank pinning kit. Innovators West has them for 75 bucks. Being that I'm darn near giving the S/C away, I will give a 50.00 credit towards one.
#18
Pro
Thread Starter
I just spoke to Mike, the sales & tech manager over at Whipple. Apparently I was completely wrong about needing "dry sump" brackets. The ONLY difference between the LS2,LS3, and LS7 kits are the blower/manifolds. So if you have Ls7 heads on your car, this kit will work.
Last edited by C6smackdown; 06-15-2016 at 07:39 PM.