drewkeen

I have an aluminum LS7 flywheel that is brand new in the box and a take out LS7 clutch assembly with 1,200 miles on it. The clutch is in great shape and was removed when some mods were installed to go with a twin disc. Car was bone stock the entire time the clutch was in it.
This is a great clutch setup for cars making anything under about 450-500rwhp. It retains stock driveability and pedal pressure while holding a lot more power.

The flywheel goes for $450 (or more) from a vendor and a new clutch is $250. I'd like $460 for everything.

drewkeen

Bump

agent jones

how much for just the clutch?

would it fit in a ls2?

drewkeen

It will fit the LS3 or LS3 flywheel, it will NOT fit the LS1 or LS6 flywheel.

PM sent on clutch

agent jones

ok let me research to see if it will fit my car. i have a 2005 LS2 stick

drewkeen

Sorry, that was a typo. The first LS3 should have been LS2.

"It will fit the LS2 or LS3 flywheel" is what that should have said. It will fit the LS2 flywheel.

Also, I tried to send over a PM but your box is full

agent jones

ok thanks. i emptied out my box should work now..

My clutch went out a couple days ago and is in the shop. I know i need the clutch for sure not sure about the fly wheel. it should be good.

i did find it for 489 here. is this what your selling?
http://www.tickperformance.com/gm-ls...-applications/

drewkeen

That is similar with the exception being that I have an aluminum flywheel and not a steel one. The aluminum verison there goes for $589.99.

The stock LS7 clutch is somewhere in the 60-70lbs range with the steel flywheel. The aluminum flywheel allows you to keep the weight around what the stock clutch in your car weighed or possibly a bit lighter. If you don't mind the extra weight then your stock flywheel should be fine (If it is in good usable shape of course)

agent jones

ok thanks. ill see if the shop says my flywheel is usable or not. if i can use my stock flywheel how much for just your clutch?

drewkeen

Still available!

drewkeen

Price drop!