Akrapovic X Pipe, Halltech, Modified Z06 Mufflers, and more
#1
Go Fast
Thread Starter
Akrapovic X Pipe, Halltech, Modified Z06 Mufflers, and more
Storage Unit Clean out. Stock Z06 parts have less 11k miles on them.
Akrapovic Titanium X Pipe for the C6 ZR1/Z06 (Very light)........ I added Kooks headers and couldn't continue to use the X pipe.
Sold
comparison stock vs Akrapovic
LS7 / Z06 Engine Covers
$65 Shipped
Halltech Killer Bee II for C6 Z06 (first design) Housing, clamps with no filter or sensor extension.
$50 Shipped
C6 Z06 Bi mode Mufflers (11k mikes) with "Muffler Mod" by Revolutions Performance, Colorado Springs, CO. - No actuators.
http://www.youtube.com/watch?v=MQ48rJI1Now
$375 Shipped.
C6 Z06 (Stock) H pipe
Sold
C6 (Stock) H pipe
$70 shipped
C6Z Manifolds & Cats
$450 Shipped
ranatelli Valve covers Standard height w gaskets LS2/L98/LS3/LS7 cost $699 new
A few minor scratches that will not be seen when coils are installed. Satin finish but can be polished if extreme shine is desired.
Sold
http://www.granatellimotorsports.com...ts-559-40.html
Stock 2007 Center Console
$110 Shipped
LS7 Cam/Stock Springs/Rockers
Make Offer
PM or Email
719-360-0065
bgreenard@aol.com
Akrapovic Titanium X Pipe for the C6 ZR1/Z06 (Very light)........ I added Kooks headers and couldn't continue to use the X pipe.
Sold
comparison stock vs Akrapovic
LS7 / Z06 Engine Covers
$65 Shipped
Halltech Killer Bee II for C6 Z06 (first design) Housing, clamps with no filter or sensor extension.
$50 Shipped
C6 Z06 Bi mode Mufflers (11k mikes) with "Muffler Mod" by Revolutions Performance, Colorado Springs, CO. - No actuators.
http://www.youtube.com/watch?v=MQ48rJI1Now
$375 Shipped.
C6 Z06 (Stock) H pipe
Sold
C6 (Stock) H pipe
$70 shipped
C6Z Manifolds & Cats
$450 Shipped
ranatelli Valve covers Standard height w gaskets LS2/L98/LS3/LS7 cost $699 new
A few minor scratches that will not be seen when coils are installed. Satin finish but can be polished if extreme shine is desired.
Sold
http://www.granatellimotorsports.com...ts-559-40.html
Stock 2007 Center Console
$110 Shipped
LS7 Cam/Stock Springs/Rockers
Make Offer
PM or Email
719-360-0065
bgreenard@aol.com
Last edited by Bgreenard; 11-15-2012 at 04:11 AM.
#2
I'll take the Akrapovix X-pipe, shipped to 85310.
What type of payment do you take ?
What type of payment do you take ?
#4
#7
Go Fast
Thread Starter
#8
Pro
Just got an email from someone. Somewhat specific to my situation but it seems as though it could work.
You would need the C6 Z06 or ZR1 3.0" H-pipe to mate with the 3.0" post manifold extensions. If you wanted to do some cutting and welding you could use your current B&B X-pipe. Keep in mind that if you also use the C6Z/ZR1 H-pipe it is 3.0 all the way back to the slip connections for the mufflers, so your 2.5" B&B Fusion wouldn't fit without modification.
I'll have to check with my local shop to see how much the mods would be for this.
You would need the C6 Z06 or ZR1 3.0" H-pipe to mate with the 3.0" post manifold extensions. If you wanted to do some cutting and welding you could use your current B&B X-pipe. Keep in mind that if you also use the C6Z/ZR1 H-pipe it is 3.0 all the way back to the slip connections for the mufflers, so your 2.5" B&B Fusion wouldn't fit without modification.
I'll have to check with my local shop to see how much the mods would be for this.
Last edited by brucemc; 10-20-2012 at 12:38 AM.
#10
Go Fast
Thread Starter
Just got an email from someone. Somewhat specific to my situation but it seems as though it could work.
You would need the C6 Z06 or ZR1 3.0" H-pipe to mate with the 3.0" post manifold extensions. If you wanted to do some cutting and welding you could use your current B&B X-pipe. Keep in mind that if you also use the C6Z/ZR1 H-pipe it is 3.0 all the way back to the slip connections for the mufflers, so your 2.5" B&B Fusion wouldn't fit without modification.
I'll have to check with my local shop to see how much the mods would be for this.
You would need the C6 Z06 or ZR1 3.0" H-pipe to mate with the 3.0" post manifold extensions. If you wanted to do some cutting and welding you could use your current B&B X-pipe. Keep in mind that if you also use the C6Z/ZR1 H-pipe it is 3.0 all the way back to the slip connections for the mufflers, so your 2.5" B&B Fusion wouldn't fit without modification.
I'll have to check with my local shop to see how much the mods would be for this.