FS: LS3 CNC Heads SDPC Porting
#1
Drifting
Thread Starter
FS: LS3 CNC Heads SDPC Porting
Heads are sold
these come not as shown with light weight valves and Z06 springs
but with SS valves and the blue Z06 springs same as yellow ones
$1200
and are 68cc
Manley nextek polished springs and Ti retainers good to .700" lift plus ADD $300.00
these are not shity patriot springs so dont compare coal to diamonds
$1500
SDPC CNC 821 castings smooth chambers
Valve Angle: 15-degree
Combustion Chamber: 70cc*
Intake Port Volume: 275cc*
Exhaust port Volume: 99cc*
Minimum Cylinder Bore Required: 4.000"
* Approximate, Numbers are within +/- 2ccs
Milling Information for Combustion Chamber Sizing:
- Approximately 0.006 per 1-cc
For 68-cc Chamber Remove 0.012
For 65-cc Chamber Remove 0.030
Specifications:
Max Lift: 0.570"
V/Springs: Stock LS3/LS6
Locks: 7-degree
Retainers: Stock
Flow Chart:
Flowed @ 28 H20
Lift 0.100 0.200 0.300 0.400 0.500 0.600 0.650
Intake 70 153 225 280 324 350 358
Exhaust 52 118 180 201 217 230 236
these come not as shown with light weight valves and Z06 springs
but with SS valves and the blue Z06 springs same as yellow ones
$1200
and are 68cc
Manley nextek polished springs and Ti retainers good to .700" lift plus ADD $300.00
these are not shity patriot springs so dont compare coal to diamonds
$1500
SDPC CNC 821 castings smooth chambers
Valve Angle: 15-degree
Combustion Chamber: 70cc*
Intake Port Volume: 275cc*
Exhaust port Volume: 99cc*
Minimum Cylinder Bore Required: 4.000"
* Approximate, Numbers are within +/- 2ccs
Milling Information for Combustion Chamber Sizing:
- Approximately 0.006 per 1-cc
For 68-cc Chamber Remove 0.012
For 65-cc Chamber Remove 0.030
Specifications:
Max Lift: 0.570"
V/Springs: Stock LS3/LS6
Locks: 7-degree
Retainers: Stock
Flow Chart:
Flowed @ 28 H20
Lift 0.100 0.200 0.300 0.400 0.500 0.600 0.650
Intake 70 153 225 280 324 350 358
Exhaust 52 118 180 201 217 230 236
Last edited by Blownfogger540; 10-21-2012 at 02:21 PM. Reason: eBay auction with forum sale
#3
Team Owner
Link to eBay auction deleted, not allowed in same thread with a forum sale.
http://forums.corvetteforum.com/foru...eir-parts.html
Selling Corvettes & their Parts
If you want to auction your car or parts on eBay, then post a link to the auction and people interested can get the details on that site. If you have a “buy it now” price on your eBay auction, you may post that with your eBay link.
We allow sales at Corvetteforum, but not auctions, so we want to avoid co-mingling the Forum sale and eBay auction of the same car or parts.
If you want to auction your car or parts on eBay, then post a link to the auction and people interested can get the details on that site. If you have a “buy it now” price on your eBay auction, you may post that with your eBay link.
We allow sales at Corvetteforum, but not auctions, so we want to avoid co-mingling the Forum sale and eBay auction of the same car or parts.
#4
Drifting
Thread Starter
Link to eBay auction deleted, not allowed in same thread with a forum sale.
http://forums.corvetteforum.com/foru...eir-parts.html
http://forums.corvetteforum.com/foru...eir-parts.html
#16
Drifting
Thread Starter
#17
Advanced
Member Since: Jul 2012
Location: Louisville Kentucky
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
These are the best flowing heads you can buy period they outflow TFS,Airflow and whoever.I have a set on my car and got 60 RWHP on my LS2 with a tune and exhaust(stock cam).
#19
Drifting
Thread Starter
#20
Advanced
Member Since: Jul 2012
Location: Louisville Kentucky
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I utilized a L76 intake so I could use the Ls2 throttle body,Also I utilized Yella Terra 1.8 shaft mount LS3 roller rockers(could have got 8 stock LS3 rockers as half are offset).