WTB: (Aug.2012) C6 rear cradle/susp, T56/TR6060/diff(any condition), LS2/3 manifolds
08-01-2012, 01:34 PM
#1
Le Mans Master
Thread Starter
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
WTB: (Aug.2012) C6 rear cradle/susp, T56/TR6060/diff(any condition), LS2/3 manifolds
Looking to buy the following:
Please call or PM, 860-989-8972
1. C6 rear cradle
2. C6 rear lower control arms
3. C6 spindles
4. C6 rear spring
5. Any of the above combinations
Trans:
1. T56(2005/6/7)
2. TR6060(2008-2012)
3. Any model (base/Z51/Z06/GS)
4. Any condition, issues/non-issue
Diff:
1. 2006up
Intake manifolds
1. LS2
2. LS3
3. With/without fuel rail/injectors
I can also "PARTIAL TRADE" new GM TR6060 Z06 trans for your Z06 T56 as "trade in" for $2395(you can pickup the new GM trans direct from the dealer to avoid any concern)............of course this is for a fully-functional T56(Z06 30 spline) in trade
Please call or PM, 860-989-8972
1. C6 rear cradle
2. C6 rear lower control arms
3. C6 spindles
4. C6 rear spring
5. Any of the above combinations
Trans:
1. T56(2005/6/7)
2. TR6060(2008-2012)
3. Any model (base/Z51/Z06/GS)
4. Any condition, issues/non-issue
Diff:
1. 2006up
Intake manifolds
1. LS2
2. LS3
3. With/without fuel rail/injectors
I can also "PARTIAL TRADE" new GM TR6060 Z06 trans for your Z06 T56 as "trade in" for $2395(you can pickup the new GM trans direct from the dealer to avoid any concern)............of course this is for a fully-functional T56(Z06 30 spline) in trade
08-10-2012, 10:00 PM
#3
Heel & Toe
Member Since: Apr 2012
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
08-10-2012, 10:27 PM
#4
Le Mans Master
if you can wait until the winter I will have the following for sale:
My current setup is a 2007 Corvette coupe 6spd manual with the Z51 option. 23xxx miles 8 of them boosted I have added the followng:
-Complete LS2 Motor 23k miles, 4 drag strip passes, lots of street runs. This is what I was told by AMS when I got my meth tune:
"The motor seems fine with all but #7 being in the 140-155 area for cranking compression. # 7 was 135-140 and we chose to leak that cylinder down as well and it only showed 4%. I’m not concerned with this rather small difference, but as expected with a motor like this it is showing a “little” wear."
-Z51 transmission
-Rear differential with DTE brace
-Drive shaft
-Axles
-Fuel tanks
-ECS 2200sl sc system, custom painted intercooler and pipes, I have the piping for both an Ls2 and Ls7 MAF 8k miles
-lg headers no cats, (I fabricated 3in cutouts on the back portion of the LG midpipe)
-Speed inc SC4 blower cam
-Twin walbro 255 fuel pumps with an aeromotive regulator, also fuel rails
-(8) siemens 60lb injectors
-Mcleod rxt clutch 8k miles, no chatters or slipping
If your interested in all the above Id sell it all for 10
My current setup is a 2007 Corvette coupe 6spd manual with the Z51 option. 23xxx miles 8 of them boosted I have added the followng:
-Complete LS2 Motor 23k miles, 4 drag strip passes, lots of street runs. This is what I was told by AMS when I got my meth tune:
"The motor seems fine with all but #7 being in the 140-155 area for cranking compression. # 7 was 135-140 and we chose to leak that cylinder down as well and it only showed 4%. I’m not concerned with this rather small difference, but as expected with a motor like this it is showing a “little” wear."
-Z51 transmission
-Rear differential with DTE brace
-Drive shaft
-Axles
-Fuel tanks
-ECS 2200sl sc system, custom painted intercooler and pipes, I have the piping for both an Ls2 and Ls7 MAF 8k miles
-lg headers no cats, (I fabricated 3in cutouts on the back portion of the LG midpipe)
-Speed inc SC4 blower cam
-Twin walbro 255 fuel pumps with an aeromotive regulator, also fuel rails
-(8) siemens 60lb injectors
-Mcleod rxt clutch 8k miles, no chatters or slipping
If your interested in all the above Id sell it all for 10
Last edited by SinisterC6; 08-10-2012 at 10:37 PM.
08-10-2012, 10:32 PM
#5
Intermediate
Member Since: Mar 2012
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
I have an entire rear cradle out of an 08 Z06. It is low mileage and is complete with all suspension, hubs, spring, arms, etc.... Make me a fair offer and it will be yours. It is in my way and I don't mind shipping it.
10-03-2012, 09:43 AM
#7
Drifting
I have all of the Stuff listed below from a 2006 Zo6 with low miles. all in great shape.
Pm me an offer on all of it and we can work something out.
1. C6 rear cradle
2. C6 rear lower control arms
3. C6 spindles
4. C6 rear spring
5. Any of the above combinations
Trans:
1. T56(2005/6/7)
Diff:
1. 2006up
Pm me an offer on all of it and we can work something out.
1. C6 rear cradle
2. C6 rear lower control arms
3. C6 spindles
4. C6 rear spring
5. Any of the above combinations
Trans:
1. T56(2005/6/7)
Diff:
1. 2006up
