FS: C6 Carbon Fiber Removable Roof Panel & Halo Set
07-09-2012, 11:51 AM
#1
Burning Brakes
Thread Starter
FS: C6 Carbon Fiber Removable Roof Panel & Halo Set
For Sale - This set of two items was purchased from Blackdog Speed Shop in Illinois. I used them on my 2010 Grand Sport Coupe which had approximately 4K miles on it at trade-in recently. The link to the place of purchase is:
http://blackdogspeedshop.com/~blackd7/index.php?option=com_content&view=articl e&id=71:blackdog-signature-series-carbon-fiber-body-panels&catid=49:body-category&Itemid=65
The removable roof panel is complete with all OEM hardware, headliner, latches, etc, and is just like a painted top except the top panel is carbon fiber. It is ready to use just like any painted or transparent factory top, in fact an OEM factory painted "donor" top was used for this top. The panel was not applied over the original - it was done right - the original painted panel was removed and the CF panel was affixed in its place. The b-pillar, or halo, is also 100% carbon fiber and not CF applied over the top of an OEM unit. In addition, the two pieces are mated in that the CF weave matches when mounted on the car - much like a factory ZR1.
As you can see in the link these items originally cost $2450 together ($1600 + $850 plus S&H ). ***SOLD*** . If you happen to live within a reasonable driving distance of Madison, Wisconsin and can meet halfway I'll discount for that also.
I'm set up for PayPal and my email address is *edited* which I check more often than the forum for pm, etc.
Thanks, Pete
http://blackdogspeedshop.com/~blackd7/index.php?option=com_content&view=articl e&id=71:blackdog-signature-series-carbon-fiber-body-panels&catid=49:body-category&Itemid=65
The removable roof panel is complete with all OEM hardware, headliner, latches, etc, and is just like a painted top except the top panel is carbon fiber. It is ready to use just like any painted or transparent factory top, in fact an OEM factory painted "donor" top was used for this top. The panel was not applied over the original - it was done right - the original painted panel was removed and the CF panel was affixed in its place. The b-pillar, or halo, is also 100% carbon fiber and not CF applied over the top of an OEM unit. In addition, the two pieces are mated in that the CF weave matches when mounted on the car - much like a factory ZR1.
As you can see in the link these items originally cost $2450 together ($1600 + $850 plus S&H ). ***SOLD*** . If you happen to live within a reasonable driving distance of Madison, Wisconsin and can meet halfway I'll discount for that also.
I'm set up for PayPal and my email address is *edited* which I check more often than the forum for pm, etc.
Thanks, Pete
Last edited by Bunker; 07-12-2012 at 03:21 PM. Reason: Item sold
