FS-LS7 Longblock 633rwhp and TR6060
03-28-2012, 06:42 PM
#1
Drifting
Thread Starter
Member Since: Oct 2009
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Sold!!
SOLD!!!! THANKS MIKE & SAM AND ENJOY YOUR NEW MOTOR!!
TRANS SOLD TO AHMED---THANKS AGAIN AND ENJOY YOUR NEW TRANS!
STAY TUNED FOR THE NEW BUILD! ITS GOING TO BE INSANE!!!
----for sale----
out of my 2009 z06 corvette
location-socal
i am selling my ls7 long block and also the tr6060 trans. Both are in excellent/perfect running condition. The motor/trans are still in the car. Serious interested parties are more than welcome to see and hear. Once deposit is received, they will be pulled from car and the remaining balance will be due at that time.
The motor made 633rwhp and 555rwtq through 2” headers. It is an absoulte beast of a motor. Only reason for selling is the fact i want to go f/i! This is a badass motor though for any project you may have.
Details on motor----
this is a stock ls7 bottom end. The heads are my stock ls7 heads that were sent to richard @ west coast cylinder heads where they received a stage 2 cnc package---bronze guides int/ext, stainless exhaust valves, milled .030”, gm 7.0 mls gaskets, and patriot extreme valve springs. It also has a custom specd comp cam specd by ryne cunningham of cunningham motor sports. Gmpp “corvette” engraved valve covers painted black with red lettering. Ported fast intake manifold painted black with red lettering also added as well as a nick williams 102mm throttle body and 160* thermostat.
Flowmatched 52# tall injectors- which do not require the use of spacers. Fluids were changed regulary in both engine and trans with synthetics used exclusively.
My z06 has 25,798 miles currently. Cms installed the head/cam package, as well as the fast intake, nick williams throttle body, aeromotive fuel rails, & 52# flow matched injectors at 16,026 miles.
Will sell as a complete motor/trans package or will spilt. Can also sell just the shortblock if you do not need/want the fast intake manifold, throttle body, fuel rails, and injectors.
Hopefully i am not missing anything but incase i have and you have a question, please let me know.
Complete longblock minus oil pan-----
fast intake manifold
102mm tb
aeromotive fuel rails
52# injectors
$10,999
tr6060-------$2500---------SOLD!!
please let me know if you have any questions
thanks
TRANS SOLD TO AHMED---THANKS AGAIN AND ENJOY YOUR NEW TRANS!
STAY TUNED FOR THE NEW BUILD! ITS GOING TO BE INSANE!!!
----for sale----
out of my 2009 z06 corvette
location-socal
i am selling my ls7 long block and also the tr6060 trans. Both are in excellent/perfect running condition. The motor/trans are still in the car. Serious interested parties are more than welcome to see and hear. Once deposit is received, they will be pulled from car and the remaining balance will be due at that time.
The motor made 633rwhp and 555rwtq through 2” headers. It is an absoulte beast of a motor. Only reason for selling is the fact i want to go f/i! This is a badass motor though for any project you may have.
Details on motor----
this is a stock ls7 bottom end. The heads are my stock ls7 heads that were sent to richard @ west coast cylinder heads where they received a stage 2 cnc package---bronze guides int/ext, stainless exhaust valves, milled .030”, gm 7.0 mls gaskets, and patriot extreme valve springs. It also has a custom specd comp cam specd by ryne cunningham of cunningham motor sports. Gmpp “corvette” engraved valve covers painted black with red lettering. Ported fast intake manifold painted black with red lettering also added as well as a nick williams 102mm throttle body and 160* thermostat.
Flowmatched 52# tall injectors- which do not require the use of spacers. Fluids were changed regulary in both engine and trans with synthetics used exclusively.
My z06 has 25,798 miles currently. Cms installed the head/cam package, as well as the fast intake, nick williams throttle body, aeromotive fuel rails, & 52# flow matched injectors at 16,026 miles.
Will sell as a complete motor/trans package or will spilt. Can also sell just the shortblock if you do not need/want the fast intake manifold, throttle body, fuel rails, and injectors.
Hopefully i am not missing anything but incase i have and you have a question, please let me know.
Complete longblock minus oil pan-----
fast intake manifold
102mm tb
aeromotive fuel rails
52# injectors
$10,999
tr6060-------$2500---------SOLD!!
please let me know if you have any questions
thanks
Last edited by FamousRR; 04-27-2012 at 05:34 PM.
03-28-2012, 07:27 PM
#4
Instructor
Member Since: Jul 2011
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Dang wish I had just a little more cash in the pocket right now. I want that fast 102/102 setup haha.
Good luck with the sale. So have you locked down the combo yet on what your doing?
Good luck with the sale. So have you locked down the combo yet on what your doing?
03-29-2012, 12:01 AM
#6
Drifting
Thread Starter
Member Since: Oct 2009
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Thats not something I want to do at the moment. I just listed today. I will give it some time before I were to break it up. And honestly if I were to break it up, the fast, fuel rails, injectors, and tb are already sold. Thanks anyways.
03-29-2012, 12:01 AM
#7
Drifting
Thread Starter
Member Since: Oct 2009
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
I hear ya on the $$$ part. **** I'm selling this stuff to help find my
New setup. I'll text you the build info!
03-29-2012, 12:49 PM
#10
Former Vendor
we did all the work on the motor, and we can vouch for all work thats been done.... if you guys have any questions for us please feel free to pm or email us
03-31-2012, 10:56 PM
#17
Team Owner
04-01-2012, 12:00 AM
#19
Drifting
Thread Starter
Member Since: Oct 2009
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
