LS3 Forged F1 416cu Motor New(Long Block)
#1
Drifting
Thread Starter
LS3 Forged F1 416cu Motor New(Long Block)
Originally Posted by TRINIC5
F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost.
Now let me tell you some parts that consist of this built.
1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts
Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.
ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.
Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)
Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets
This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)
I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.
I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.
I am asking $9,400.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.
I reduced the price for the new year.
F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost.
Now let me tell you some parts that consist of this built.
1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts
Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.
ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.
Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)
Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets
This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)
I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.
I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.
I am asking $9,400.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.
I reduced the price for the new year.
Last edited by TRINIC5; 12-26-2011 at 09:55 AM.
#2
Instructor
Member Since: Mar 2011
Location: Denver CO
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost.
Now let me tell you some parts that consist of this built.
1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts
Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.
ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.
Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)
Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets
This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)
I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.
I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.
I am asking $10,400.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.
Now let me tell you some parts that consist of this built.
1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts
Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.
ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.
Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)
Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets
This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)
I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.
I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.
I am asking $10,400.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.
#3
Drifting
Thread Starter
#7
Drifting
Thread Starter
#12
Drifting
Thread Starter
#13
Drifting
Thread Starter
#16
Drifting
Thread Starter
Originally Posted by TRINIC5
F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost.
Now let me tell you some parts that consist of this built.
1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts
Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.
ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.
Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)
Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets
This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)
I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.
I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.
I am asking $9,400.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.
F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost.
Now let me tell you some parts that consist of this built.
1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts
Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.
ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.
Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)
Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets
This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)
I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.
I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.
I am asking $9,400.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.
Last edited by TRINIC5; 12-26-2011 at 09:56 AM.
#18
Drifting
Thread Starter
No problem, don't need food on my table and the Vendor is an Active big time tuner here which will and could influence people. I am not here to have a contest.
#19
Burning Brakes
I have watched you "not bash" this vendor every chance you get. If the motor is as good as you say why would you pull this ad? If it's a good motor and the vendor was wrong it would prove your point. As it stands now, it looks like the vendor you hate so much knows this motor is bad.