Gene Culley

Hi All,

The Z51 sway bar kits and Z06 sway bar kits are currently available. You can order on the site by going to www.gmpartshouse.com/search.html and use part number c6z51bars or c6z06bars.

Thanks, Gene.

||--Z51 Sway Bar Kit--||

25919502 – Front stabilizer bar
10339124 – Rear stabilizer bar
10387838 (2) – Front stabilizer insulators
15241135 (2) – Rear stabilizer insulators

Complete kit front and rear is 199.24
For the Z51 bars on our website, use part number c6z51bars on our website under Chevrolet make.

For a limited time we’re offering a free upgrade to poly bushings on Z51 sway bar kits only.

||--Z06 Sway Bar Kit--||

25919502 – Front stabilizer bar
15262804 – Rear stabilizer bar
10387838 (2) – Front stabilizer insulators
15262795 (2) – Rear stabilizer insulators

Complete kit front and rear is 226.81
For this kit on our website, use part number c6z06bars under Chevrolet make.

Gene Culley

Sway bar kits available.

newschool

Which bars are stiffer?I know the fronts are the same but isn't the rear z51 bar bigger?

Gene Culley

The Z06 bars would be stiffer and the rear Z06 bar would be bigger.

newschool

What about the Zr1 bars?

Gene Culley

You can buy them, but you must have the tire width to support the size of these bars or you will have too much oversteer.

jpuli28

Im assuming Z51 bars are a mere swap of the base C6 bars? Is anything else needed?

newschool

I have 285,345's for my car.I'm just wondering if the ZR1 bars are in fact the stiffer bar out of the three..

Gene Culley

Yes, they are just a swap. There is nothing else needed.

Gene Culley

If you have 345's it wouldn't hurt to use them, but if you experience oversteer you're going to have to go back to Z06.

RideZX6R

will these work on C5? Do you sell T1 bars?

Gene Culley

Yes on all of your questions. Feel free to contact me directly for details.

Gene Culley

Follow GM Parts House on Twitter at www.twitter.com/gmpartshouse.

2004

It sounds like a good deal. Is there that much of an improved feel over the C6 base set-up? Harder ride? Its a driver, I want it to corner a little better without the harder ride. Cost on shipped to 85050? Thx.

Gene Culley

You'd want to use the C6Z51 bars. The ride is barely compromised, if at all, but the cornering ability is hugely improved. The shipping on that kit is a little less than $20. You can add them to the cart and get the total price shipped by going to www.gmpartshouse.com/search.html and using part number c6z51bars and be sure to select Chevrolet make.

Gene Culley

Order your sway bars from GM Parts House.

LS9Drew

would these be a good upgrade on a stock suspension c5z06? and how much is shipping to 95008 cali

filmjay

hmmmm.....still running the free poly bushing upgrade on the Z51 bars?

Gene Culley

If you have C5 Z06 bars, I wouldn't bother. They are a little smaller in diameter, but not enough to spend $200. Shipping is normally around $20.

Gene Culley

Absolutely.