Kenne Bell 2.6 Twin Screw Blower
Heat Exchanger Water to Air
Kenne Bell Boost A Pump
Aeromotive High Flow Fuel Rails
60# Injectors
Air intake tube and high flow K&N Filter
8 Rib UPGRADED pulley system
Upgraded Belt Tensioner
Power steering bracket
Including belt (always recommend new ones)
INCLUDING A HOOD! if you don't need the hood subtract $400 from the price. Hood is the one pictured and not the see through hood, I have plans for that.
Purchase the system and you can take my Kooks coated long tube 1 7/8 Headers for only $500 more
Purchase the system and you can take my Alkycontrol Meth injection system for only $XXX more FREE UPGRADE!
Purchase the system and you can take my Coil relocation kit with Custom Taylor 10.4 Wires for $300 more
RECESSION PRICE: $4800 FIRM plus shipping and insurance
You could install this kit yourself in a matter of hours, with no special tools, get your friends together, get the beer and have an install party.
*UPDATE* Kit is off the car, packaging it now, taking pictures and it will be in boxes shortly. To sweeten the deal, I'm going to include the Alkycontrol meth kit with the MAF that is setup to run with this kit, thats a savings of $800. This kit is 100% reversible. If your ready to buy call me! 951-847-six-eight-three-eight
Features:
Self contained oiling system (No need to drill and tap to get oil to your supercharger)
Self Venting Pulley Bolt
Powder coated gloss finish bypass tube
Billet External Bypass Valve
Universal bracket adapts to cable or electronic throttle bodies
93MM Hi Flo inlet manifold (accepts 76 or 90mm tb)
High efficiency Bar and Plate Intercooler
Billet front mount drive
Billet steel pulley
Pre-assembled kit for ease of installation
“Big Block” feel at any engine or vehicle speed, not just peak rpm.
More low and mid range torque and HP because it makes more boost there.
Quick and easy 4 minute pulley changes (5-18 psi).
Twin Screw efficiency (cooler air charge temp, lower parasitic loss).
Serviceable. Supercharger can be rebuilt.
Kit is set at 11PSi of boost, with a quick change of the pulley, you can adapt to your power levels
Stock LS2 motor with a Torco tune, car put down 589RWHP 569RWTQ
Motor has 100K miles and compression is perfect, tune is spot on, and will include a Hp tuners file to get you started.
Blower has 9200 miles on it, and runs perfect
Selling this kit as it is easier to part out my car and sell it rather then have it with the mods. Moving to a Z06 project and finishing up my other C6 so I've decided
to part with this car first. Price is rock bottom and ultra cheap. Included is almost everything you need to have this system installed on your Vette. The only thing missing would be the Oil sensor relocation kit, which TPE sells. If you feel like having a 200 Shot of Nitrous at any RPM on tap this is the system for you. PM me with any questions. System will be off on Monday August 17th, and ready to ship on Tuesday. First come first serve, there will never be a deal quite like this. Also if your looking into purchasing a C6, I will be selling my car for $23,000 with the widebody, rims/tires, nav and a few other goodies PM me for my cell number if you are SERIOUS about buying.
Does not bolt onto 08-09-10 Vettes as they have the LS3 motor. Can work if you swap the heads to a nice set of ported 243's or other castings such as AFR's or TSP's. Thank you.
*UPDATE* JEFF @ TPE said he would install this kit for only $1499 at his shop in Las Vegas NV. This is a smoking install price, and you will have the best in the business doing the install.
Sorry no PAYPAL Certified check, money order, bank wire, or bank deposit allowed. Click my feedback link from LS1tech below.
It would work, however you would have to swap the L92 heads out for a set of 243's. With all the money your saving, maybe even swap out to a set of 225's to lower the compression, then you could up the boost safely.
can you please pm me the best you can do for it shipped to 80526? and this is a complete system for an LS2 vette right? does it come with installation manual? I have a stock c6 and wondering how much gain will i see out of this supercharger and will it be safe on stock block (stock everything actually ) and daily use car? sorry for these many Qs, I am really interested and don't have any knowledge about these.
Thanks
Last edited by walhan_qtr; 08-16-2009 at 01:53 AM.
How many miles are on the kit and what kind of dyno were those numbers put down on?
Thanks!
Chris
Dyno numbers are above in the sale post. There are 9,200 miles on the kit.
Quote:
Originally Posted by walhan_qtr
can you please pm me the best you can do for it shipped to 80526? and this is a complete system for an LS2 vette right? does it come with installation manual? I have a stock c6 and wondering how much gain will i see out of this supercharger and will it be safe on stock block (stock everything actually ) and daily use car? sorry for these many Qs, I am really interested and don't have any knowledge about these.
No problem I will PM you. BEST PRICE is listed, I mean it cant get any better then that.
I am going to include a detailed removal video and write up, so if you are purchasing it and are wanting to install it yourself, think of it like a reverse engineering deal.
TTT Night bump, LOTS of people interested but until the cash hits the hands its still available, removing it tomorrow, will be ready to ship, will post videos.
Corvette Store
Kenne Bell Twin Screw LS2 COMPLETE system for Sale with Hood! @CHEAP@ Recession Price
) and daily use car? sorry for these many Qs, I am really interested and don't have any knowledge about these.
