Another Sunset Orange Creations innovation!
ZERO BATTERY DRAIN remembers last setting mode!
Whatever setting you shut the car off in, is the way it starts up.
NEW Exhaust Commander All-in-1 bi-mode exhaust vacuum retrofit kit
with Zero Battery Drain remembers last setting mode available now!
Its the most advanced bi-mode retrofit system you can buy!
Dont you want your system to remember?
Now Available with the Exhaust Commander D.A.S.H. controller which allows you to control you bi-mode exhaust from your dash D.I.C. reset button. Click Here to Read All about it!
Exhaust Commander is the only system to have a Zero Battery Drain remembers last setting mode available.
Get the best system available and have one that remembers!
This is a new option available on the All-in-1 bi-mode exhaust retrofit kit that I have been selling for the last year. Works on all C6's 2005-2009.
Its always been 100% Zero Battery drain since its inception, now with this exclusive Sunset Orange Creations new feature its even better!
With this bi-mode vacuum retrofit solution you get everything you need to control your retrofitted
bi-mode exhaust and get the option to now have a ZERO BATTERY DRAIN remembers last
setting mode. Whatever position your butterflies are in when you turn the car off, is the
position they return to when you start the car again.This system is 100% Zero Battery drain!
Using a special non-volatile memory, I have created a system that is powered off when the car is off
so that there is no battery drain at all, yet it retains its memory so it comes back to life exactly as it
was shut down. Shut down the car in quiet mode? It will start in quiet mode. Shut it down in loud mode,
and it will start up in loud mode. Its a revolutionary new feature available right now with the Exhaust Commander All-in-1 bi-mode exhaust retrofit kit.
The Exhaust Commander No Splice rpm opening option I developed is also available available with this kit!
This NPP vacuum retrofit kit includes the wireless controller with one button keyfob remotes,
spare keyfob remote batteries, and all
of the necessary vacuum lines, vacuum solenoid and wiring to complete the control system installation.
It will give you full open / full closed modes and gives you the ability to switch between the modes
instantly using the supplied One button wireless remotes.
Typical install time is around 1 or 2 hours. NO holes need to be drilled in your car, and everything could be removed without a trace if you wanted to.
These systems are assembled and tested by Me personally, right here in the USA!
Quick install summary:
1: The engine vacuum tap used is the correct GM bi-mode vacuum port on the back of the
intake manifold, just like the 2008-2009 NPP C6, Z06 and ZR1's use. Not the brake booster or other critical
engine sensor systems. Do it right just like the GM factory does it. The GM engineers that designed the bi-mode exhaust system know the most reliable way to tap vacuum for the system is at the rear intake vacuum port.
The vacuum line is run above the tunnel plate from the engine to the
vacuum solenoid unit and then you hook up the vacuum lines to the butterfly valves on the mufflers.
2: You have the option to mount the vacuum solenoid box inside the car completely out
of the elements OR outside the cabin depending on your install preference. You choose!
3: The wireless controller is located in the passenger fuse panel area just like all my innovative Exhaust Commander controllers allowing controller upgrades when they become available! The power cable is run
easily from the passenger footwell area to the rear of the car by tucking it underneath the trim panels.
4: Once everything is hooked up, Start the car and enjoy your fully operational bi-mode
exhaust system!
This is a great vacuum retrofit system for those who want to retrofit bi-mode exhaust to their C6
that didnt come with it. All you need is the All-in-1 kit and the bi-mode mufflers and you have a
functioning bi-mode exhaust.
Simple to install, and available with features that Corvette enthusiasts demand!
The standard kit allows you to start in either open or closed modes with a remembers last setting mode.
Always 100% Zero Battery Drain. Only $160 plus shipping!
Also available, Exhaust Commander D.A.S.H. dash D.I.C. reset button control
so you can control your exhaust right from your dash D.I.C. reset button!
My revolutionary No Splice RPM opening option is also available if you want it.
I believe this is the best Bi-mode retrofit system I have ever created!
Here are a few of the philosophies of Sunset Orange Creations :
The desire to design new products with advanced, easy to use features for the Corvette Community.
A constant effort to improve the products that we make, while providing exceptional value
at the same time.
Never becoming complacent in the community and always remembering who supports us and
who we support.
Sunset Orange Creations will continue to develop new and improved, exciting products
for the Corvette enthusiast.
I am looking forward to helping you in the future with any of your bi-mode exhaust needs.
Feel free to contact me anytime with questions or custom system requirements.
Location: Exhaust Commander Wireless Bi-Mode Exhaust Controllers, Innovative and advanced technology! --- Check out my website @ www.sunsetorangecreations.com
Add bi-mode exhaust to YOUR C6!
The Exhaust Commander All-in-1 NPP retrofit kit has many options to choose from. Wireless keyfob remotes, Dash DIC control of the butterflies, Zero Battery Drain remembers last setting mode, User selectable rpm opening mode.
Each system is custom built to your specifications!
Do your want the highest quality most technologically advanced bi-mode retrofit system?
Choose Exhaust Commander!
Last edited by SunsetOrangeCreations; 10-22-2009 at 05:31 AM.
Location: Exhaust Commander Wireless Bi-Mode Exhaust Controllers, Innovative and advanced technology! --- Check out my website @ www.sunsetorangecreations.com
How to get the vacuum cap off the back of a LS2 or LS3 manifold.
I have installed over 20 of my NPP retrofit systems personally and have popped that damn cap off so many times I have it down pat and can do it in 5 minutes or less now.
Here is the secret.: Use a small x-acto knife to score / cut through the the place where the cap twists off at. There is a little groove where you can place the blade and then score / cut the cap off. If you can get a decent score on the line or even cut through it about 1/3 to 1/2 way it will twist right off with little or no effort at all.
Hope that helps and enjoy you bi-mode exhaust!
Ben
Last edited by SunsetOrangeCreations; 01-02-2009 at 06:57 PM.
Location: Exhaust Commander Wireless Bi-Mode Exhaust Controllers, Innovative and advanced technology! --- Check out my website @ www.sunsetorangecreations.com
Exhaust Commander All-In-1 NPP retrofit kits are built in a modular manner.
This allows the upgrade of the wireless controller from a standard controller which starts in either open or closed mode, to the remembers last setting mode controller, to the full on RPM opening and remembers last setting mode controller at any time in the future should the owner want it.
Its just a matter buying the new upgraded controller module and then swapping in the new controller module for the old one.
That was one of the design innovations with my All-In-1 NPP retrofit kit setup. It allows for change and upgrade easily.
Ben
Last edited by SunsetOrangeCreations; 12-05-2008 at 02:45 AM.
Ben: This RPM controller is ..Nothing to splice, easy to set up. Great job on the whole system.I now control the exhaust by remote, by DIC reset button, or just let them open when I hit 2800rpm...Thanks for a great product..
I am looking forward to hearing how you like your new controller.
Ben
What would you suggest for my application? I have the complete z06 exhaust with all the vacume lines and solenoid installed hard wired to a mini fuse tap plugged into the wiper fuse location.I used that location because it has no power there when the ignition is off.I have a rocker switch in the console F55 location,but would like remote and or homelink control ????
Location: Exhaust Commander Wireless Bi-Mode Exhaust Controllers, Innovative and advanced technology! --- Check out my website @ www.sunsetorangecreations.com
Quote:
Originally Posted by davisbs
What would you suggest for my application? I have the complete z06 exhaust with all the vacume lines and solenoid installed hard wired to a mini fuse tap plugged into the wiper fuse location.I used that location because it has no power there when the ignition is off.I have a rocker switch in the console F55 location,but would like remote and or homelink control ????
Location: Exhaust Commander Wireless Bi-Mode Exhaust Controllers, Innovative and advanced technology! --- Check out my website @ www.sunsetorangecreations.com
You can always reach me from my contact me page at www.sunsetorangecreations.com and I am able to respond as soon as I see them as they go direct to my mobile. If you need any other info, let me know.
Ben
Last edited by SunsetOrangeCreations; 05-06-2009 at 01:53 AM.
I am looking forward to hearing how you like your new controller.
Ben
Any sales coming for the retrofit with RPM window? I have some Z06 mufflers I will be installing in my C6 but $315.00 is a bit steep. Let me know if you plan on putting these on sale soon. Thanks!
Corvette Store
NEW! All-in-1 NPP bi-mode exhaust vacuum retrofit kit w/ remembers last setting mode!
This system is 100% Zero Battery drain! 
Ben
