m60gov20

Who's done it, where are you spraying it and what kind of results have seeing?

inspector12

A ton of ppl and it works well.

m60gov20

I guess what I'm looking for is how well it works post rotor vs pre rotor. Just looking to spray a 50-150 shot max.

old motorhead

Years ago, I ran a hundred shot on one of my supercharged trucks. That was injected right behind the throttle body. I really couldn't feel it, but it ran two tenths faster in the quarter mile. 12.4 vs 12.6. I didn't think I got the full 100 out of it. That was with a Magnuson MP122 blower, not a TVS. If running a TVS2300 today, I'd get it set up for flex fuel and call it a day. There are guys on here making mid 700's at the wheels with that setup. Don't think they're seeing much over 10psi either.

m60gov20

Yeah, I would think you'd pick up more then 2 tenths with a 100 shot. My goals are 775-825 whp blower only then spray to around 900 whp.

old motorhead

Holy smokes, that's going to be a handful. Forgot you were dealing with a 416. I did go back and review our conservation from February. That thing is going to be "interesting" in the lower gears! What kind of nitrous controller are you going to use?

m60gov20

I'm about to get it back together. I want to see how it does power and iat wise and go from there. I have no idea how much boost it'll make with the extra cubes, heads and bigger cam. I'll most likely use this controller if I end up doing the nitrous.
https://nitrousoutlet.com/i-30559958...ow-switch.html