Attz0r

So I'm installing a zex black out kit (plate) on my friends 2010 grandsport and I have some questions.

1. What wire do I need to tap to get TPS signal, can I just do it from the TPS sensor itself? If so which wire.

2. Where can I get proper tach signal, which coil and what wire needs to be tapped.

This is using a NOS mini progressive controller for both tach and activation.

Pics would be GREATLY appreciated.

615C6

I also have the blackout kit. I have a 2005 and its the purple wire on TPS. I know the wire color varies through the years so double check will a DMM. Your looking for around .5v closed and around 4.5V wide open throttle. I'm not sure about the tach signal. I'm sure some one else will chime in.