Z06-TT

You put. 1344 to be exact. What was the record??

Slo-Poc

Awesome love it is that pro efi I see?

FaisalDashti

Yes it is.

GAMEOVR

What kind of TQ does that monster make?? 1/2" head studs or no?


What all is done to the driveline besides the upgraded driveshaft? Stock rear end, axles, couplers etc?

I'll be curious to see how well the Pro EFI traction control works with those NT05R's out back. Nice work!

8seclxtal

I really don't know what the record was. I guess it depends on what turbos are on the kit. A set of DKT 67s would definetly make another 150 or so !

0Taylor@DallasPerformance

10mm ARP2000 headstuds.

Stock 6060 transmission and Z rear diff with RPS triple carbon clutch and 3.5" driveshaft with ZR1 couplers.

venomws7

We're hoping to dyno our C6 ZO6 with 454ci LSX Tall Deck + DKT 67/66 next week the car at the shop right now getting the final check before the dyno.
We're hoping to be close to 1500rwhp on 25-28psi

0Taylor@DallasPerformance

Great job as always

First 1000+whp blower C5/C6 in Kuwait at Xtreme Performance
Bader soon to be first 1400+whp blower C6 at Xtreme Performance
First 1400+whp TT C5/C6 in Kuwait at Xtreme Performance



Congrats Faisal and Nasser, be careful. Please get some better wheels/tires.

Jasil

Very bad ***!!!

FaisalDashti

Thanks taylor , it's an honor to work with someone like you.it wouldnt be done without your help and sending the good stuff as always.

SinisterC6

Dang very impressive guys, I cant wait to see this beast going through some gears

Arun@Dasilvamotorsports

Crazy numbers Faisal!

Good job as always buddy!

NICK YOSKIN

Dang! Awesome #s...got me beat by 7hp..lol. this makes me wanna toss her back on the dyno.
Made my numbers on 15* and very low tens(afrs). Did you guys play with timing and if u did what gains? I ask cause its something that I really think about. I currently run 18* and its certainly noticeable. Also how do u like proEFI? I run HP tuners 2.5 and have to rape 255kpa cell for overboost.
Thanks!

narfdanarf

Except this car has properly sized turbos...look at the powerband. Everyone **** all over me two weeks ago in a conversation about turbo size. This is for all the people who think 62mm's can't get it done.

edit: there is still about 150hp on the table at least with this combo if you wanted to push it.

NICK YOSKIN

Are you talking to me?

FaisalDashti

timing is about 16-17* right now , A/F IN Low 11s.it would pick up more with more timing but just dont want to push it more.PROEFI is the best with that power level you can control what ever you want.

FaisalDashti

Yes it has more power , the reason power went down is because the proefi lowers the boost when fuel pressure starts to drop and goes to default mode,i will fix the fuel pressure drop and test it again to see what would it make if boost stays fixed at 26psi

FaisalDashti

Thanks Arun , long time no see

0Rob@ChampionMotors

Awesome job guys.
Rob.

sultan hamdi

Nice numbers