You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
So after knowing that my T3/T4 57mm turbos are dying, I decided to get new turbos. I have the HP Performance Twin Turbo kit and a 402 LS2 that I'm temporarily using. I'm planning to get a new motor later but in the mean time I will be using this motor to get everything up and running. I think I will be stuck with those 2.5" downpipes since I haven't seen anybody offering 3" downpipes on the HP Performance kit.
I have a goal of 1200 RWHP as a minimum and that should be with 91 pump gas, straight meth and race gas.
How would you think I can reach up to my goal easily?
I'm already pushing 746 RWHP on this 402 with 91 pump gas and meth on those 57mm turbos and ~11* of timing.. I think 1200 is doable with the right turbos and right motor, don't you think?
Yeah gotta make 3" dp. I gotta be honest I've never driven car in kill mode. Last outing at Etown was a waste..track would even hold off gates. I understand that not every track event won't be ideal especially when its just a little ole rental. For that Etown event id rather have a h/c and get more seat time/practice. Going into my build it was based around killer highway ride. When you build keep your goals in mind.
I'm already pushing 746 RWHP on this 402 with 91 pump gas and meth on those 57mm turbos and ~11* of timing.. I think 1200 is doable with the right turbos and right motor, don't you think?
Not on 91 unless the motor is huge.
Obviously with an entirely different setup you can make your goal lol. Not with what you're working with.
If you are looking for something that is a step up and a direct bolt on, what about a pair of Turbonetics t3/t4s with the 60-1 compressor and the F1-62 turbine? Or a Comp CT3 series like a 6262 or 6765? Let me know, would love to get you set-up!
With our crappy fuel and Weather 1200rwhp Is not going to happen But 1000-1050 is possible with the right turbos + engine 16-18psi
For 1200rwhp on 91+meth it must be 427+ci with 76+ turbos 18-20psi and IMO the car will be a ticking bomb with our fuel..
Yeah gotta make 3" dp. I gotta be honest I've never driven car in kill mode. Last outing at Etown was a waste..track would even hold off gates. I understand that not every track event won't be ideal especially when its just a little ole rental. For that Etown event id rather have a h/c and get more seat time/practice. Going into my build it was based around killer highway ride. When you build keep your goals in mind.
If you are looking for something that is a step up and a direct bolt on, what about a pair of Turbonetics t3/t4s with the 60-1 compressor and the F1-62 turbine? Or a Comp CT3 series like a 6262 or 6765? Let me know, would love to get you set-up!
With our crappy fuel and Weather 1200rwhp Is not going to happen But 1000-1050 is possible with the right turbos + engine 16-18psi
For 1200rwhp on 91+meth it must be 427+ci with 76+ turbos 18-20psi and IMO the car will be a ticking bomb with our fuel..
Sam baby you can't imagine how meth is improving the fuel. It is really fun to have and gives a lot of room to play when tuning the car.
Watch me hit that 1200 on your dyno with our crappy fuel
Sam baby you can't imagine how meth is improving the fuel. It is really fun to have and gives a lot of room to play when tuning the car.
Watch me hit that 1200 on your dyno with our crappy fuel
I swear I wish to see your black Beast making 1400rwhp on pump + meth and I know how much Meth can help with tune I've seen it on lots of cars but you're talking 1200rwhp !!!
LMR made thise numbers on 18psi 440ci and Billet 82mm turbos and 93 octane not our 88octane
I hope with my new GT55-94 single turbo I can 1400rwhp on kill mode
And 900rwhp on 13-14psi straight pump gas
I swear I wish to see your black Beast making 1400rwhp on pump + meth and I know how much Meth can help with tune I've seen it on lots of cars but you're talking 1200rwhp !!!
LMR made thise numbers on 18psi 440ci and Billet 82mm turbos and 93 octane not our 88octane
I hope with my new GT55-94 single turbo I can 1400rwhp on kill mode
And 900rwhp on 13-14psi straight pump gas
I'm really happy to hear that the yellow Sleeper is waking up soon
Will be looking forward to smoke the $hit out of you
Corvette Store
Need New Turbos... Help me Decide!
