Lethal Performance Big Red Ver 1.0
#1
Burning Brakes
Thread Starter
Member Since: Dec 2010
Location: San Antonio TX
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Lethal Performance Big Red Ver 1.0
We finished up Big Red tonight and it it looks like the single plane did its job. We switched from the Fast 102 to the Custom made LSX single plane done here in San Antonio at Lethal Performance. Not port matching or anything. As cast just chromed the intake because Gus likes the bling. There are a few ponies left in Big Red but we ran out of time and we need some rest. The video's arent that good because there off our phones. Was a long and trying day but in the end we got what the customer wanted.
Tech Junkie Specs:
255 KPA (22.5 psi)
17.5 on the timing
TR8 plugs
E85
Alky kit
IAT relocation
Custom map sensor and HP OS 2.5 bar
Less timing than last setup.
SAE was 1200 rwhp
So here is a couple of pics and a video
And what is next to come in the next couple of weeks!
Tech Junkie Specs:
255 KPA (22.5 psi)
17.5 on the timing
TR8 plugs
E85
Alky kit
IAT relocation
Custom map sensor and HP OS 2.5 bar
Less timing than last setup.
SAE was 1200 rwhp
So here is a couple of pics and a video
And what is next to come in the next couple of weeks!
Last edited by LethalPerformanceTX; 09-18-2012 at 06:11 AM.
#6
Safety Car
Sick setup bro
#11
Drifting
#15
Burning Brakes
#16
Le Mans Master
That dyno graph is very interesting. Both Peak HP and Torque have already been reached where they cross at around 5700rpm and HP is falling fast...
#18
Safety Car
Where did the spoiler come from?
#19
BUT... This car did do work and it pulled the big boy belt off to send SW home hahahahaha!!
Congrats guys see you in a few weeks.
#20