MIGHTYM0USE

i'll take a quote for the adapter components, any custom shafting, and the trans case.

if you don't do it that way then ill take a quote minus converter.

MIGHTYM0USE

I've already contacted Mark for my back up plan

Just not trying to waste too many peoples time until i have a chassis headed my way.

racerrob333

Yeah he seems like a cool guy. What size turbo are u going with?

MIGHTYM0USE

off the top of my head twin 80's. but i'm months and months from that choice.

Frans96ss

Yes it is only sold as a complete kit. Parts are around 15-18k alone. Depending what options you want. Its pretty pricey

racerrob333

U can always do a glide and 9 in and keep it a IRS car thats what I did

atomicfusion

MM give me a call... I know where your Chasis is... I can deliver it to the cage shop too...

atomicfusion

Ipsmotorsports.net has arranged a few installs so far with my chassis shop. I am pretty sure pricing was better for those that went through the shop.

As for what I paid, you have to remember that I had a 4 point, then a 10 point and finally a 25.3 cage.

I would imagine most of you would want something like the 10 point I had with swing out (fully removable) door bars. That cage did not sacrifice anything and even at 6'2" I was still comfortable in the car with stock seats. IIRC the configuration I had was about $7500, but I'm not sure if that is what it would cost today.

The chassis shop that did mine is here in Columbus OH, and they do everything from roll bars to complete tube Chasis builds, but they aren't a CF sponsor, so contact IPS for more info on that.


The options were limitless but I chose a removable parachute holder that was through the tag so you wouldn't know when I had I off, and I had them put my chute release on my ebrake handle. They will do whatever you want as long as it doesn't compromise safety.

atomicfusion

I held a ton of power with the RPM 4l80e auto conversion...

97408sccoupe

About how much power and what diff was it mated to? Does anyone make the 9" to 4l80-e adapter ?

NICK YOSKIN

Google contemporary Corvette and speak with Ron. Tons of rollers.

atomicfusion

My Rpm 4l80 was matted to a c6z rear end (also RPM built). It held up and I never hurt that Trans... It is in a ne ca now.

MIGHTYM0USE

have a lot of feelers out (thank you guys) but no sales yet!

racerrob333

I cant speak for everybody but I like seeing all these people building all these fast cars. Even better I cant wait to start racing them, its good stress relief

walhan_qtr

Good luck. hope everything works out for you

bradenW

This ought to be fun to watch!

MIGHTYM0USE

doing my best!

MIGHTYM0USE

first piece of the puzzle procured!

bs3 box, harness, external reluctor!

bradenW

Cool. If you're considering using a racepak dash, I have one from Fireball's old TA with the pig tail to plug n play with bs3.

MIGHTYM0USE

you can shoot me a price, but as of right now im planning to leave the factory cluster in place and functional.