A&A Twin Turbo- It's up and running
#1
Platinum Supporting Vendor
Thread Starter
A&A Twin Turbo- It's up and running
We've just been chipping away a little at a time but we've got it up and running. Of course it's pouring rain and I can't even drive it, but it looks cool.
I have turbo blankets and all kinds of heat wrap to go on it. We've moved everything so there's not much that's even close to the hot parts.
The 2006 hood has a light fixture and the hood liner contours around it. It touched the pipe, leaving the black mark on the wastegate pipe. I'll put on a 2007 hood liner and that should fix that issue.
We'll see what else starts to melt, if anything, next week.
I have turbo blankets and all kinds of heat wrap to go on it. We've moved everything so there's not much that's even close to the hot parts.
The 2006 hood has a light fixture and the hood liner contours around it. It touched the pipe, leaving the black mark on the wastegate pipe. I'll put on a 2007 hood liner and that should fix that issue.
We'll see what else starts to melt, if anything, next week.
__________________
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
#13
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
Awesome!
#15
Melting Slicks
Member Since: Apr 2007
Location: Willow Springs IL
Posts: 3,290
Likes: 0
Received 0 Likes
on
0 Posts
Lot's of heat under there. Are you using a different hood to remove some of it? I would think the wiring at plastic under there would take quite a beating otherwise?
#16
Melting Slicks
Member Since: Dec 2002
Location: Lone Star State
Posts: 2,898
Likes: 0
Received 0 Likes
on
0 Posts
#19
Supporting Tuner
Way