What do you use for Meth/Alky fuel
#1
Intermediate
Thread Starter
Member Since: Sep 2009
Location: Epsom NH
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
What do you use for Meth/Alky fuel
Hey everyone, I picked up my first vette a couple months back (previous camaro owner) and I am looking into FI. I am toying with the idea of meth injection as well, so that I can get just a little extra boost. I am wondering what people use for meth, has anyone used windshield washer fluid? I have heard people say a 40/50 mix blue non detergent windshield washer fluid is perfect, but I don't know if that's a crappy fuel. Do most of you order or purchase straight meth in your area, or use alcohol? Let me know what you use and where you get it from, thanks!
#4
Safety Car
Member Since: Oct 2001
Location: Dallas/Valley Ranch TEXAS!!!
Posts: 4,945
Likes: 0
Received 0 Likes
on
0 Posts
100% methanol VP Fuels M3, it is the best you can buy for a street car, it is the only methanol offered with additives that guard against bore washing... ECS has done all of the research for us... we get to benefit from their publicly shared data, through much testing... sounds like you are off to a good start, methanol is a must with F.I. imho...
#5
Melting Slicks
Member Since: Dec 2002
Location: Lone Star State
Posts: 2,898
Likes: 0
Received 0 Likes
on
0 Posts
What BIG say's!!!!
100% methanol VP Fuels M3, it is the best you can buy for a street car, it is the only methanol offered with additives that guard against bore washing... ECS has done all of the research for us... we get to benefit from their publicly shared data, through much testing... sounds like you are off to a good start, methanol is a must with F.I. imho...
#6
Drifting
Member Since: Aug 2009
Location: Texas 1,002rwhp/928rwtq
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09-'10
100% methanol VP Fuels M3, it is the best you can buy for a street car, it is the only methanol offered with additives that guard against bore washing... ECS has done all of the research for us... we get to benefit from their publicly shared data, through much testing... sounds like you are off to a good start, methanol is a must with F.I. imho...
#7
#8
Jason
#9
Drifting
Member Since: Aug 2009
Location: Texas 1,002rwhp/928rwtq
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09-'10
#11
Race Director
#12
Maybe a stupid question ---- but for us that slept through chemistry class
What is the difference between Methanol an Ethanol ? Could you replace Methanol in this application with Ethanol ?
What is the difference between Methanol an Ethanol ? Could you replace Methanol in this application with Ethanol ?
#13
Le Mans Master
ethanol has an extra carbon and 2 hydrogens making it a bigger molecule, and releases more energy when it combusts, im not sure how it stacks up to methanol for cooling but ive heard that 50/50 water meth has great cooling abilities
#14
Last month, I tried to order it direct from VP and they are willing to sell it. $38.00 for a 5 gallon pail and $114.00 more to deliver it. OUCH. If you ordered a 30 gallon drum, shipping was the same and only a marginal price break per gallon for the volume purchase.
#18
Intermediate
Thread Starter
Member Since: Sep 2009
Location: Epsom NH
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Do you run through it very fast? I would probably be running progressive and not start injection until 5lb or so. I'd imagine as long as I am not constantly into the gas it will last me pretty long. I just have no idea at all as I know no one who runs meth or alky
#19
Drifting
Member Since: Aug 2009
Location: Texas 1,002rwhp/928rwtq
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '09-'10
It takes me about 3 tanks of gas from normal driving to go through a washer tank of M3. I am sure it would go a lot faster if I was deep in boost, because I have an aggressive ramp.