Supercharger ordered!
07-09-2009, 07:52 AM
#1
Racer
Thread Starter
Member Since: May 2008
Location: Houston Texas
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Supercharger ordered!
just ordered the vortech v-3 system from andy. looking fwd to getting the car set up
Last edited by EOD_Tech Infidel; 07-09-2009 at 11:04 AM.
07-09-2009, 09:35 AM
#3
Race Director
Member Since: Jul 2000
Location: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
Posts: 15,270
Received 1,457 Likes
on
786 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
Finalist 2020 C7 of the Year -- Modified
2020 C6 of the Year Finalist - Modified
Cole - You will be very happy with the results. Looking forward to getting started on the install. I've been in contact with Ken daily. Karl's been on the road as you well know. I may or may not be able to tag along to Lake City to meet you.
07-09-2009, 11:02 AM
#4
Melting Slicks
07-09-2009, 11:05 AM
#5
Racer
Thread Starter
Member Since: May 2008
Location: Houston Texas
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
07-09-2009, 03:42 PM
#9
Race Director
Member Since: Jul 2000
Location: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
Posts: 15,270
Received 1,457 Likes
on
786 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
Finalist 2020 C7 of the Year -- Modified
2020 C6 of the Year Finalist - Modified
07-09-2009, 08:08 PM
#10
Former Vendor
Member Since: Jul 1999
Location: Indianapolis Indiana
Posts: 2,103
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '11
Very cool SSGt USAF I have heard about this project through the grapevine and think I may end up in the mix here. Karl stopped by my shop yesterday for a bot BTW.
Whats up Tally and Motorhead
Mike Norris
I have heard about this project through the grapevine and think I may end up in the mix here. Karl stopped by my shop yesterday for a bot BTW.Whats up Tally and Motorhead
Mike Norris
07-09-2009, 08:38 PM
#11
Race Director
Member Since: Jul 2000
Location: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
Posts: 15,270
Received 1,457 Likes
on
786 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
Finalist 2020 C7 of the Year -- Modified
2020 C6 of the Year Finalist - Modified
07-09-2009, 09:13 PM
#12
Hi Mike,
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
07-09-2009, 10:51 PM
#13
Racer
Thread Starter
Member Since: May 2008
Location: Houston Texas
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mike,
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
We volunteered to take this one away from you because he's like a brother...military brother that is and our labor rates are really cheap at $0.00. His budget didn't allow for the kit AND the install so we offered to get the guy in the F/I door for a beer. I don't think you have much to worry about though with our volume of about 1-2 a year!
The install on these A&A kits is so straightforward even the proverbial caveman could do them given enough hours. We have 3 caveguys doing this one. I suspect the owner will end up in your shop to get his tune tweaked and a dyno sheet when we are all done.
Eventually I need to get up with you for a cam in my 09' C6 LS3. I will be looking for something along the lines of a LG G6XE (mild). I'd do it myself but I'm not confident enough to use my car as a training tool and the calibration after the fact is also probably beyond my expertise. I'll keep saving my pennys and you'll be hearing from me eventually.
i've heard great things from the 3 cavemen
07-12-2009, 12:53 PM
#18
Racer
Thread Starter
Member Since: May 2008
Location: Houston Texas
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
be gentle its her first time
07-12-2009, 07:56 PM
#19
2005 Beast
Yes!
I'd like to tag along with this as I ordered and will be getting a Vortech installed to my vert this week at my Vette shop in Clearwater FL along with some black scorp wheels.
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
07-12-2009, 08:01 PM
#20
Racer
Thread Starter
Member Since: May 2008
Location: Houston Texas
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to tag along with this as I ordered and will be getting a Vortech installed to my vert this week at my Vette shop in Clearwater FL along with some black scorp wheels.
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
Would be cool if we got together after our installs....
Wouldn't mind a t - shirt from A&A as well!
sure man
need to find where all the vette guys around tampa have been hiding