A&A kit going to be installed next week...

LMBC6Brian · 10-11-2007, 07:05 PM

Is there anything I need to do to the car to prepare? Im not doing the install. The only thing I can think of would be....

1. Change the oil so the blower can break in with clean mobil1. 4000 miles on current oil. Car has only 5700 miles total.
2. Fill it up with premium 93 octane for the tunning.
3. Make sure all the parts are loaded in the car so I dont have to drive over an hour to the installer to get them to him.

Anything else that would be helpful to the installer and make sure it goes smooth?

corvette pilot · 10-11-2007, 08:06 PM

don't bother changing the oil. They have to drill into the oil pan and tap a drain hole for the supercharger's return line, and I'm sure they will be draining the oil when they do that. If not, I wouldn't want them working on my car!

LMBC6Brian · 10-11-2007, 09:48 PM

Good call on that. I'm going to bring the oil and filter with me so he can change it after he taps the oil pan. He said if you tap the oil pan right, then you wont need to change the oil. I on the other hand, prefer that he does it, and he's going to. Anything else I have to do>? Also, does the blower need breakin time, or can I go out there and rip on it?

Brian