F/S 2012 CRM GS modified
#1
Safety Car
Thread Starter
F/S 2012 CRM GS modified
Selling 2012 Grand Sport Coupe, Crystal Red Metallic, black interior, 6 sp manual, with 10,432 mostly highway miles due to the purchase of a 2015 C7. $45,000.00.
Car has been adult owned and only driven by me (age 65), nonsmoker, has NOT been raced or tracked, used for car shows only. Its a one owner car.
Car has won many awards and I hate to depart with it but cannot justify owning two Corvettes.
Still has new car smell. Car is almost new, no accidents, no dings, no paint chips, and no rash or scratches on both set of wheels. Interior is in excellent condition.
Car has been detailed after every time it has been driven.
Comes with the factory equipped chrome aluminum wheels and run flat tires with approximately 4k miles and the aftermarket CCW 505 custom wheels with Michelins PS 285/30 ZR19 front and 335/25 AR20 rear run flat tires with approximately 6k miles.
Clear bra installed at MacMulkin Chevrolet upon its purchased October 2011 and includes the front bumper, approximately 1/3 of hood, mirrors and rocker panels.
Car is producing approximately 610 HP at the rear wheels.
The car was originally ordered with the following options:
LT3, Chrome Aluminum Wheels, Dual-mode exhaust, Crossed flag seat trim on headrests.
The following modifications have been performed by East Coast Supercharging.
Paxton SL-1500 supercharger kit
Custom belt guard on head unit.
Autometer Dual gauge pod
LS1 “ECS” blower cam 230/236 Duration 572/578 lift 115 LSA
Mantic 9000 series twin clutch kit with flywheel and slave cylinder
ECS clutch bleed kit
DeWitts dual fan radiator
ACCEL pro fit ceramic spark plug wire set with extended wires w/NGK spark plugs
Kaetech custom valve covers painted satin black
Kaetech coil relocation kit with custom painted covers
ARH headers custom coated satin black by Jett Hot
Intake manifold wrapped in gloss black
Mild to Wild exhaust controller
Ceramic brake pads front and rear
Top Flight Productions removable front license plate bracket
Sale will also include the stock radiator shroud, hood liner, cargo cover, and factory caps in order to remove the Terminator graphics from the car should the buyer wish to do so.
I have most of the original parts if someone would want to take car back to stock.
Interior of the car is stock other than the white ball shift **** and custom gauge pod.
Car has been adult owned and only driven by me (age 65), nonsmoker, has NOT been raced or tracked, used for car shows only. Its a one owner car.
Car has won many awards and I hate to depart with it but cannot justify owning two Corvettes.
Still has new car smell. Car is almost new, no accidents, no dings, no paint chips, and no rash or scratches on both set of wheels. Interior is in excellent condition.
Car has been detailed after every time it has been driven.
Comes with the factory equipped chrome aluminum wheels and run flat tires with approximately 4k miles and the aftermarket CCW 505 custom wheels with Michelins PS 285/30 ZR19 front and 335/25 AR20 rear run flat tires with approximately 6k miles.
Clear bra installed at MacMulkin Chevrolet upon its purchased October 2011 and includes the front bumper, approximately 1/3 of hood, mirrors and rocker panels.
Car is producing approximately 610 HP at the rear wheels.
The car was originally ordered with the following options:
LT3, Chrome Aluminum Wheels, Dual-mode exhaust, Crossed flag seat trim on headrests.
The following modifications have been performed by East Coast Supercharging.
Paxton SL-1500 supercharger kit
Custom belt guard on head unit.
Autometer Dual gauge pod
LS1 “ECS” blower cam 230/236 Duration 572/578 lift 115 LSA
Mantic 9000 series twin clutch kit with flywheel and slave cylinder
ECS clutch bleed kit
DeWitts dual fan radiator
ACCEL pro fit ceramic spark plug wire set with extended wires w/NGK spark plugs
Kaetech custom valve covers painted satin black
Kaetech coil relocation kit with custom painted covers
ARH headers custom coated satin black by Jett Hot
Intake manifold wrapped in gloss black
Mild to Wild exhaust controller
Ceramic brake pads front and rear
Top Flight Productions removable front license plate bracket
Sale will also include the stock radiator shroud, hood liner, cargo cover, and factory caps in order to remove the Terminator graphics from the car should the buyer wish to do so.
I have most of the original parts if someone would want to take car back to stock.
Interior of the car is stock other than the white ball shift **** and custom gauge pod.
Last edited by wkidvette; 01-08-2015 at 09:47 AM.
#9
Safety Car
Thread Starter
I'm taking this car off the market until my C7 is received. Cannot be without a Vette in prime car show season. It will be re-listed at a later date. Sorry, for any inconvenience this caused any interested parties. Thanks to all those who contacted me regarding it.
#11
Safety Car
Thread Starter
Honestly, I made a mistake and should have listed it for more money. When it goes back on the market it will be at 47k with serious offers considered. Its not driven regularly so the mileage will not change drastically when its re-listed.
#13
Burning Brakes
bump for sweet car.
If I had the money, I'd be looking for a supercharged, low miles, Grand sport from a owner who is very particular about the car, and this one fits the bill.
If I had the money, I'd be looking for a supercharged, low miles, Grand sport from a owner who is very particular about the car, and this one fits the bill.
#17
Safety Car
Thread Starter
The car recently passed the Maryland emission test.
The car has not been tracked, raced and no burnouts. It was modded and customized for car shows not for racing of any kind.
The car has not been tracked, raced and no burnouts. It was modded and customized for car shows not for racing of any kind.