FS: Jeremy Formato's/Fasterproms '07 Silver Z06
#1
Former Vendor
Thread Starter
FS: Jeremy Formato's/Fasterproms '07 Silver Z06
***SOLD***
In order for us to stay current with the latest and greatest GM has to offer, it means we have to sell some of our project cars. Our Z06 has been my favorite car I’ve ever owned, but look to replace it with something even more exceptional - hopefully a C7 Z06.
With the current combination, the car makes 570rwhp/520rwtq. In building the car the objective was to have the most overall complete vehicle with little-to-no drivability loss over a factory Z. The car currently has just over 89,000 miles on it and the tires have PLENTY of life left in them. There is currently over $13,000 in aftermarket modifications installed on the vehicle as it sits. I had the factory GM leather removed from the seats and they were recovered by Interiors by Jesse with very high-quality black leather with suede (Alcantara) inserted centers. They’re in excellent shape and I had them triple-stuffed so they would have a more supportive side bolster. In addition to the leather and suede additions, the LED illumination provides an upscale feel these cars deserve. These modifications are something you’ll appreciate every time you drive the car and improve the luxury feel to another level.
I’ve never had the car at the dragstrip, but have beaten a 10.30 at 136mph cars and lost to a 10.20 at 138mph car. The car will absolutely walk away from GSX-R 750. J I have taken the car to the road course a number of times and, with slicks, it is more than capable of being one of the fastest - if not THE fastest - cars on the circuit. It will handle anything you can throw at it in its current condition.
Asking price is $38,500 - car books for $36,000 with the miles.
The current parts that are on the car are as follows
Engine
- Callaway Cold Air Intake
- Fasterproms ported LS7 intake and throttle body
- Fasterproms ported and milled cylinder heads
- Fasterproms custom camshaft, springs, and pushrods
- 160-degree thermostat
- ATI underdrive pulley
- Katech oil pump
- Fasterproms modified oil pan
- Stainless Works with 2-inch primaries, velocity spikes, and 3-inch collectors
- ZR1 side skirts
- LG Motorsports manual exhaust controller
- Fasterproms custom modified mufflers
- Stock flow-matched injectors
- Fasterproms valve covers and remote mount coils
- Stock LS7 clutch and flywheel
Suspension
- Nitto NT05 285/35R18 and NT05R 345/30R19
- Stock
- Vettebrakes polyurethane bushings
- Pfadt camber kit
Interior/Appearance
- All the Vette flag logos are covered with 3M carbon.
- Factory gunmetal Z06 wheels.
- LED interior illumination lighting
- Alcantara console
- Alcantara shift boot and ****
- Reupholstered the seats and repadded (Interiors by Jesse)
- Custom heat extractor hood
- Fasterproms splitter under tray (Splitter extension)
- ZR1 Katech carbon splitter
- SNR fabbed diffuser
- 3M clear bra across the front bumber, behind the fenders, and side mirrors
VIDEOS:
https://www.facebook.com/photo.php?v...63055934437079
https://www.facebook.com/photo.php?v...86477044633190
Please let me know if you have any questions about the car if you’re interested in purchasing it from me.
Thank you for taking a look!
In order for us to stay current with the latest and greatest GM has to offer, it means we have to sell some of our project cars. Our Z06 has been my favorite car I’ve ever owned, but look to replace it with something even more exceptional - hopefully a C7 Z06.
With the current combination, the car makes 570rwhp/520rwtq. In building the car the objective was to have the most overall complete vehicle with little-to-no drivability loss over a factory Z. The car currently has just over 89,000 miles on it and the tires have PLENTY of life left in them. There is currently over $13,000 in aftermarket modifications installed on the vehicle as it sits. I had the factory GM leather removed from the seats and they were recovered by Interiors by Jesse with very high-quality black leather with suede (Alcantara) inserted centers. They’re in excellent shape and I had them triple-stuffed so they would have a more supportive side bolster. In addition to the leather and suede additions, the LED illumination provides an upscale feel these cars deserve. These modifications are something you’ll appreciate every time you drive the car and improve the luxury feel to another level.
I’ve never had the car at the dragstrip, but have beaten a 10.30 at 136mph cars and lost to a 10.20 at 138mph car. The car will absolutely walk away from GSX-R 750. J I have taken the car to the road course a number of times and, with slicks, it is more than capable of being one of the fastest - if not THE fastest - cars on the circuit. It will handle anything you can throw at it in its current condition.
Asking price is $38,500 - car books for $36,000 with the miles.
The current parts that are on the car are as follows
Engine
- Callaway Cold Air Intake
- Fasterproms ported LS7 intake and throttle body
- Fasterproms ported and milled cylinder heads
- Fasterproms custom camshaft, springs, and pushrods
- 160-degree thermostat
- ATI underdrive pulley
- Katech oil pump
- Fasterproms modified oil pan
- Stainless Works with 2-inch primaries, velocity spikes, and 3-inch collectors
- ZR1 side skirts
- LG Motorsports manual exhaust controller
- Fasterproms custom modified mufflers
- Stock flow-matched injectors
- Fasterproms valve covers and remote mount coils
- Stock LS7 clutch and flywheel
Suspension
- Nitto NT05 285/35R18 and NT05R 345/30R19
- Stock
- Vettebrakes polyurethane bushings
- Pfadt camber kit
Interior/Appearance
- All the Vette flag logos are covered with 3M carbon.
- Factory gunmetal Z06 wheels.
- LED interior illumination lighting
- Alcantara console
- Alcantara shift boot and ****
- Reupholstered the seats and repadded (Interiors by Jesse)
- Custom heat extractor hood
- Fasterproms splitter under tray (Splitter extension)
- ZR1 Katech carbon splitter
- SNR fabbed diffuser
- 3M clear bra across the front bumber, behind the fenders, and side mirrors
VIDEOS:
https://www.facebook.com/photo.php?v...63055934437079
https://www.facebook.com/photo.php?v...86477044633190
Please let me know if you have any questions about the car if you’re interested in purchasing it from me.
Thank you for taking a look!
Last edited by Fasterproms; 08-30-2013 at 10:49 AM.
#2
Melting Slicks
Fartpipe is in the market, I bet he has a cold Yoo-Hoo and pack of Rolo's that will trade you...
Last edited by C5kid; 06-11-2013 at 06:58 AM.
#5
Le Mans Master
Great looking Z06 Hey Jeremy what is the current mileage on the Z06?
#7
Drifting
Nicest looking hood ive ever seen...nicest looking silver z06 also...and i like the use of the word "walk"...13,000 seems cheap for what u did here? Trying to help your sale
#8
Melting Slicks
This is so very very tempting. If I was in the market right now, I would definitely buy this car. I have seen it in person more than once and know Jeremy. This is an awesome car and it is done right. He is very meticulous about all the details.
Good luck with the sale man. Can't wait to see what you build next.
Take care
Steve
Good luck with the sale man. Can't wait to see what you build next.
Take care
Steve
#9
I am in the market--prices are starting to get into my range--beautiful car---but dont know about 89K miles?
I am new to the C6 vette--(not to the engine and I know that sounds strange)--can some members help educate me?
I am new to the C6 vette--(not to the engine and I know that sounds strange)--can some members help educate me?
#14
Racer
I have been around this car for years even driven it, phenomenal car it even inspired me to have him build me my own H/C zo6! Jeremy knows his LSX's! Built and done right!
-Matt
-Matt
#15
Y'all know I am kinda new to this forum. But I am not new to cars
I have been looking for a vette for some months now. I kinda like this one. I would like it better with the lpe tank and a more performance oriented radiator........but you can.t be too picky when buying a used car.
I realize the owner has been around a while and he seems to have a very good rep...that means a lot. So...even if I don't get this car..I just want to bump the thread to inform those that don't realize it, the miles on the car is not as much of a concern when the car has been built and maintained well. This one obviously has been maintained very well.
I have been looking for a vette for some months now. I kinda like this one. I would like it better with the lpe tank and a more performance oriented radiator........but you can.t be too picky when buying a used car.
I realize the owner has been around a while and he seems to have a very good rep...that means a lot. So...even if I don't get this car..I just want to bump the thread to inform those that don't realize it, the miles on the car is not as much of a concern when the car has been built and maintained well. This one obviously has been maintained very well.
#16
Former Vendor
Thread Starter
Bump for the weekend.
Thanks for all the compliments on the car. Please tell your friends in the market for a Z about it. It's ready to go and slay some cars! haha
Thanks for all the compliments on the car. Please tell your friends in the market for a Z about it. It's ready to go and slay some cars! haha
#17
Former Vendor
Thread Starter
There has been increased interest in this car this week. It's only a matter of time before it's gone. Working out the details on a deposit now.