2008 C6 Z06 Huge mod list, runs low 10's N/A, *rebuilt title*
#1
Former Vendor
Thread Starter
2008 C6 Z06 Huge mod list, runs low 10's N/A, *rebuilt title*
Its come time to sell my Z.
Its a victory red 2LZ, with black interior, nav, HUD, and heated seats
I purchased the car wrecked from my dentist. The car was hit in the front, with minor frame rail damage in front of the cradle. The car was put on a rack and is in absolutely perfect condition as far as the frame work goes. This car has been on two alignment racks at different shops and checks out perfect with no extra shims or spacers.
I have put 14,000 miles on the car since it was fixed without issue.
Now for the list of mods,
Engine-
Mhale forged pistons
Katech rod bolts
Coated cam bearings
Arp main studs
Arp head studs
Arp crank bolt
ATI underdrive dampr
custom comp cams 248/253 .631/.631 115 lsa (this is an old grind, there is 20-30 wheel hp available if a new cam is installed)
13.8:1 tuned on E85 only
ported stock heads
Manley nex tek springs and retainers
Comp trunion kit
comp pushrods
Meziere water pump
Katech tensioner
Fast 102 ported
Nick williams 102 tb
Halltech carbon 113 with maf forward
Exhaust-
ARH 2” headers, no cats
B&B bullets
Drivetrain-
Exedy twin disk
tick master cylinder with full lenght AN line
DSS carbon propshaft
Ceramic torque tube bearings
Quick time bell with window for adjustable clutch
Level 6 6060 with custom .80 fifth gear
Stage 3 diff with 3.90 gear and Eaton posi unit and DSS stub shafts
Pfadt engine and trans mounts
braided brake lines
hawk ceramic pads
Accesories-
Cowl hood *stealthy*
Zr1 carbon skirts and splitter
New NT05 front tires
New NT05R rear tires
GM full length spoiler
GM lock pick with ipod control for factory navigation
Car has run a best of 10.40@137 in 3500ft of air on a 96 degree day with a CCW 17inch dragpack
Car currently has just over 51,000 miles on it.
Asking 34,000.00, I am a motivated seller.
I will get pics posted tomorrow. I don't know where all of mine went.
Its a victory red 2LZ, with black interior, nav, HUD, and heated seats
I purchased the car wrecked from my dentist. The car was hit in the front, with minor frame rail damage in front of the cradle. The car was put on a rack and is in absolutely perfect condition as far as the frame work goes. This car has been on two alignment racks at different shops and checks out perfect with no extra shims or spacers.
I have put 14,000 miles on the car since it was fixed without issue.
Now for the list of mods,
Engine-
Mhale forged pistons
Katech rod bolts
Coated cam bearings
Arp main studs
Arp head studs
Arp crank bolt
ATI underdrive dampr
custom comp cams 248/253 .631/.631 115 lsa (this is an old grind, there is 20-30 wheel hp available if a new cam is installed)
13.8:1 tuned on E85 only
ported stock heads
Manley nex tek springs and retainers
Comp trunion kit
comp pushrods
Meziere water pump
Katech tensioner
Fast 102 ported
Nick williams 102 tb
Halltech carbon 113 with maf forward
Exhaust-
ARH 2” headers, no cats
B&B bullets
Drivetrain-
Exedy twin disk
tick master cylinder with full lenght AN line
DSS carbon propshaft
Ceramic torque tube bearings
Quick time bell with window for adjustable clutch
Level 6 6060 with custom .80 fifth gear
Stage 3 diff with 3.90 gear and Eaton posi unit and DSS stub shafts
Pfadt engine and trans mounts
braided brake lines
hawk ceramic pads
Accesories-
Cowl hood *stealthy*
Zr1 carbon skirts and splitter
New NT05 front tires
New NT05R rear tires
GM full length spoiler
GM lock pick with ipod control for factory navigation
Car has run a best of 10.40@137 in 3500ft of air on a 96 degree day with a CCW 17inch dragpack
Car currently has just over 51,000 miles on it.
Asking 34,000.00, I am a motivated seller.
I will get pics posted tomorrow. I don't know where all of mine went.
#5
Le Mans Master
#7
Former Vendor
Thread Starter
Here are the pictures that I have currently. Its been a little hectic around the shop with a customer in from out of town and getting ready to head to bowling green.
#11
Premium Supporting Vendor
With that red Z06 you should be able to. Step it up!
#12
Former Vendor
Thread Starter
#19
Le Mans Master
Hes not interested in any Trades. I talked to him yesterday. He is at the LS Fest so i figured i would just let you know bc it may be a few days before he got back to you.