2010 Ragin Racin Stage 4 Lethal Z06 MEMPHIS AREA
#1
Racer
Thread Starter
**REDUCED**2010 Ragin Racin Stage 4 Lethal Z06 MEMPHIS AREA *PRICE REDUCED*
SOLD, PAYMENT RECEIVED
Hey everyone,
Reason for selling: Daughter is now in College so re-adjusting budget so no student loans will be needed...
A bit about me...I live in Olive Branch MS...Work at Jim Keras Chevrolet in Memphis TN as the Finance Director. This is my 2nd Vette (prior is a E-Forced GS). I love this car...but duty calls. I am able to assist the potential buyer in the financing of this Z due to my resources at work. There is a Lein through Ally Bank. Proper payment/payoff will be excercised within minutes through an Ally SmartCash portal that I have available at work...this basically is an electronic payment directly to Ally...so no title hold-ups. Now, about the car...
2010 Corvette Z06 2LZ
Black/Black
Navigation
Chrome Spyder Wheel option
VIN# 1G1YK2DEXA5101851
In service date: 11/17/2010
Current miles: 10,900 (updated 9/24/12)
BETTER PICS UPLOADED...
Mods:
Over $20,000 invested in total.
All work installed and tuned by Randy Leger at Ragin Racin
Mods installed at @6,000 miles...
Ragin Racin Stage 4 package:
Lethal Cam 232/250 113 660/660
Ported/Milled Heads 11.8 CR
ARP Studs
Ferrea valve guides
Ferrea exhaust valves
FAST 102mm, Ported
FAST ls3 kit, Rails, adapters, o-rings
7.700 push rods
FAST 57# injectors
Nick Williams 102mm TB
MOREL Race Lifters
PAC Spring/Ret kit
Katech LS9R clutch kit
Kooks 1 7/8 Catted headers
Corsa Dual 4" Series Tips
Callaway Honker
160 T-Stat
JLAudio Stealthbox w/amp
Royal Purple Oil ONLY (last changed 9/24/12)
**35% tint added 09/04/12 (after pics were taken)**
563/517 SAE
Video of the dyno http://www.youtube.com/watch?v=pjBaKsgya4g
As with any N/A modified car...driveability is acceptable on a driver by driver basis...Also, the tune can be adjusted to more appropriatley suit the needs and driveability of the potential buyer by Randy at Ragin Racin via EFI Live.......
I currently have some Reproduction Glossy Black Spyder wheels on the car. I also have NT05's on the rear. I have the stock Chrome Spyder's and Stock rear GY's as well as the other stock exhaust components that will be a part of this transaction.
ALL PICTURES ARE HERE (bulletts in pics are sold) http://s970.photobucket.com/albums/a...ese/?start=all
Clean Carfax
No Warranty Blocks
No Curb Rash
My pricing will be as follows:
SALE PENDING
This price includes:
The Z06
All modifications
All stock components as shown in the pics (photobucket)
Two keys (new batteries as of 09/18/12)
Owners Manual
Maroni Sticker
Please PM any specific questions to me. Please respect me, and my thread to limit any unnecessary comments. Thanks again!
Scott McNeese
Calls can be made directly to me if needed at 901-361-8233cell
Hey everyone,
Reason for selling: Daughter is now in College so re-adjusting budget so no student loans will be needed...
A bit about me...I live in Olive Branch MS...Work at Jim Keras Chevrolet in Memphis TN as the Finance Director. This is my 2nd Vette (prior is a E-Forced GS). I love this car...but duty calls. I am able to assist the potential buyer in the financing of this Z due to my resources at work. There is a Lein through Ally Bank. Proper payment/payoff will be excercised within minutes through an Ally SmartCash portal that I have available at work...this basically is an electronic payment directly to Ally...so no title hold-ups. Now, about the car...
2010 Corvette Z06 2LZ
Black/Black
Navigation
Chrome Spyder Wheel option
VIN# 1G1YK2DEXA5101851
In service date: 11/17/2010
Current miles: 10,900 (updated 9/24/12)
BETTER PICS UPLOADED...
Mods:
Over $20,000 invested in total.
All work installed and tuned by Randy Leger at Ragin Racin
Mods installed at @6,000 miles...
Ragin Racin Stage 4 package:
Lethal Cam 232/250 113 660/660
Ported/Milled Heads 11.8 CR
ARP Studs
Ferrea valve guides
Ferrea exhaust valves
FAST 102mm, Ported
FAST ls3 kit, Rails, adapters, o-rings
7.700 push rods
FAST 57# injectors
Nick Williams 102mm TB
MOREL Race Lifters
PAC Spring/Ret kit
Katech LS9R clutch kit
Kooks 1 7/8 Catted headers
Corsa Dual 4" Series Tips
Callaway Honker
160 T-Stat
JLAudio Stealthbox w/amp
Royal Purple Oil ONLY (last changed 9/24/12)
**35% tint added 09/04/12 (after pics were taken)**
563/517 SAE
Video of the dyno http://www.youtube.com/watch?v=pjBaKsgya4g
As with any N/A modified car...driveability is acceptable on a driver by driver basis...Also, the tune can be adjusted to more appropriatley suit the needs and driveability of the potential buyer by Randy at Ragin Racin via EFI Live.......
I currently have some Reproduction Glossy Black Spyder wheels on the car. I also have NT05's on the rear. I have the stock Chrome Spyder's and Stock rear GY's as well as the other stock exhaust components that will be a part of this transaction.
ALL PICTURES ARE HERE (bulletts in pics are sold) http://s970.photobucket.com/albums/a...ese/?start=all
Clean Carfax
No Warranty Blocks
No Curb Rash
My pricing will be as follows:
SALE PENDING
This price includes:
The Z06
All modifications
All stock components as shown in the pics (photobucket)
Two keys (new batteries as of 09/18/12)
Owners Manual
Maroni Sticker
Please PM any specific questions to me. Please respect me, and my thread to limit any unnecessary comments. Thanks again!
Scott McNeese
Calls can be made directly to me if needed at 901-361-8233cell
Last edited by scottss; 11-13-2012 at 07:21 PM. Reason: Another Price Reduction
#5
Racer
Thread Starter
ttt...UPLOADED SOME CLEAR PICS THIS TIME...
I would like to sell through my dealership to take advantage of the tax benefit on what I downsize for...
Thanks for the look! MAKE AN OFFER...I am ready to sell...
Scott
I would like to sell through my dealership to take advantage of the tax benefit on what I downsize for...
Thanks for the look! MAKE AN OFFER...I am ready to sell...
Scott
Last edited by scottss; 09-25-2012 at 10:33 AM. Reason: Better Pics uploaded...
#9
Racer
Thread Starter
I just had some pics taken/uploaded from an actual professional camera...I added a few with more detail.
I referenced a quarter to show the size of the two rouge rock chips. One is on each side of the car...figures...
Have a nice day!
Scott
I referenced a quarter to show the size of the two rouge rock chips. One is on each side of the car...figures...
Have a nice day!
Scott
#13
Racer
Thread Starter
Every time I drive the Z...it makes me wonder why I would ever sell it. Anyway, any takers/offers before I may decide to keep it.......again?
ttt
ttt
#14
Instructor
Member Since: Aug 2000
Location: Greenbrier AR
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Ever try to take it over to the Bartlett cruise in on Thursday night? Vette guys are there and people put for sell signs on all kinds of muscle and sports cars there. I have seen Lambo's and other high end cars there. PM me for directions if interested. Good luck!
#15
Racer
Thread Starter
Scott
#16
20,000 for those mods? I thought all of that can be done for 10,000? Why is the rwhp so low? Shouldnt it be around 590 rwhp? Vettedoctors cam only gets you around 550 dont it? For 20,000 you should of gotten a forged motor. Or swapped your ls7 for a RHS bLOCK.
#17
Racer
Thread Starter
Thank you for your post but please do a bit of research before attempting to minimize the cost of my mods...heck I should know....I paid for them. I spared no expense to ensure top notch equipment was installed. Both for performance and added safety/security on the head work.
Also, I am including the extra wheels, corsa, JLAudio and headers into my total investment estimate.
Thanks for the free bump for me though lol.
Also, I am including the extra wheels, corsa, JLAudio and headers into my total investment estimate.
Thanks for the free bump for me though lol.
Last edited by scottss; 10-05-2012 at 10:32 AM.
#18
Racer
Thread Starter
The Stage 4 with the Lethal cam is more street friendly of a cam. 560-575ish is the norm. Step up to the Punisher cam and you would get to 590ish but it will be less streetable. To each their own. The car will fly either way. I don't get to caught up in shops selling hp #'s (hell every dyno is different anyway)...I prefer a reputable shop that has proven customer service...and won't BS you. Ragin Racin is a great shop.
Scott
Scott
#20
Racer
Thread Starter
Thank you for your unrelated info you have so kindly placed on my "for sale" thread. I am attempting to sell my car. Not argue over how much money I have spent on it. Very unprofessional on your part. It is hard enough selling a 60k car on the Internet, much less with someone scrutinizing your mod costs. Yes my head/cam work was not $20k. ALL of my mods when adding everything I have done that is different from when I bought it. Extra wheels , corsa, headers JLAudio amp, sub and box....and all supporting mods make it close to $20k.
Scott
Scott